CLUG Bike Clip Indoor & Outdoor Bicycle Storage Rack & Mount System, 5 Sizes, Easy to install

I have two CLUGs... a "MTB 44-57mm" for my bike with 2.1"W tires and a "MTB XL 58-69mm" for my 2.6"W tires. CLUGs make storage a breeze! Sooo much floor space saved!! And honestly it's super attractive storage - I enjoy seeing the bikes there. Snapping the front tires in place and popping them out is super easy. I did listen to the reviews that said not to place CLUGs in a high traffic area, because the bike can get knocked askew. This is true - but I wouldn't want it to lock onto my bike so hard that damage is caused if I then crash into the bike while walking or carrying something! The CLUGs work perfect in the corner of my room. They also mount very securely to the wall. Would've been a breeze to mount with two people... someone to hold the guide in place. Unfortunately I didn't have help, but it was still manageable. The box comes with an AWESOME guide built right in to help you place your screws into the right spot. I can't imagine not having CLUGs now that I've experienced them! It's such simple storage!! Gives bikes their own space without bumping against anything or tipping and getting damaged. Also, the upright storage position is good for suspension in the forks... GearHooks says it well here: "If the bike is stored vertically on the wall, the forks are tilted backwards. This means that the oil in the forks runs backwards and pools against the foam seals. This keeps the seals properly lubricated and stops them drying out." All in all these CLUGs are one of my favorite purchases ever!

This is the third one I buy of these for 3 different bikes over the years. They work great, are super simple and easy to use and look minimal and clean. I mean, the mtb x-large is massive in comparison to the road bike, but it has to be. I am a bit sad that it didn’t come with a back wheel wall protector like the road bike size does but I’ll figure something out.

I just put this up so I cannot comment on the tire deflation aspect other than if it does I plan to attach a Velcro strap, BUT I can say this was my best option for functional and visible storage for my bike in my new apartment. I purchased the smallest MTB sized Clug (43-62mm) as my bike has tires that were 2.2 which was the max but still within the size range I thought. This thing is S.N.U.G on my tire, It makes a really squeaky noise and looks like I'm going to break the plastic each time I have put it in. I am considering going tubeless in the future, and if I do, I will probably purchase the larger size to at least see if the attach/release aspect is smoother. I put a little bit of water on the "gripper" aspect the last few times I put the bike in the rack, and it seemed to go easier? If I had to purchase again, I would go the next size up. I use my bike often for single track and some city transportation, so I would not be surprised if I break it over time simply because it is THAT snug on my tires and I am frequently removing and re-attaching my bike. I did customize my Clug with some matte black spray paint on the "clipper" part prior to installation, and I think it blends into my tire nicely, or you could paint it an accent color. since the tire never touches the "clipper" part, I have no worries that it might come off on my tire or chip away as long as I am using the bike rack correctly. I understand where this bike rack might not be best for everyone, BUT for my situation it is WONDERFUL. I would be careful if mounting in drywall alone, as the paper instructions explicitly stated that it should only be used on studs or in brick/concrete so I am not sure if that is just for the MTB versions or all of them. You really do have to pull forcefully to get your bike out, and I would worry about ripping it clean out if mounted on drywall alone, at least in my situation. I took off one star because its REALLLLLLY snug, and I wish that sizing guide had been clearer for those of us with 2.2 tires.

Probably not the intended application but works just fine. I've had it up for a couple months now, no issues. I didn't really like the price but, given that its the only option I could find, I suppose it's worth it. There was enough room under the clip to mount the charger (Velcro tape) which makes for a nice clean storage and charging station. The mount doesn't seem like much but its proven itself to be quite durable: I use the scooter several times a week so it gets plenty of use. Mounting was easy and straightforward. The wheel fits snug but not too tight. Very happy, just wish it was 10 bucks less...

I purchased the size specified for my road bike. with 1-1/4" tires. It installed easily. I used the vertical configuration with my rear tire on the floor against the wall and the front tire in the mount, exactly as recommended. I used the included anchors and measured everything using the box diagram. The first time I used it it worked fine. Held the bike in and everything was good. The second time I used it the same way; slipped the bike into the bracket as before. I left the house and came home to find my bike laying on the floor. The orange part of the bracket was broken. I now have to straighten my read derailleur because it is bent. This mount is clearly not sturdy enough. I should have known since it's just a piece of plastic. I do not recommend this product. I wanted to like it for the simple, unobtrusive design, but it's just not good. I'll probably end up spending more to fix the derailleur than I did on this bracket. Look elsewhere.

Product work well. However, it really needs to be mounted in a stud or wood. I used the plastic flanges for installing the rack in drywall and it was not secure. After a few uses it started to pull away from the wall. The road bike size worked fine but mountain bikes pulled out easily.

I bought these originally to hold up my kids bikes, but I ordered the wrong size. BUT they have worked perfectly for other things, such as my sons light saber!

Purchased this as a minimalist solution to bike storage in a very small bedroom (pics attached). Installation is wonderfully simple - I used the included template to mark spots to drill to put small holes for the drywall anchors. Tap in the drywall anchors with a hammer. Then take a phillips head screwdriver to put the screws into those. It holds the bike as designed. The tires shown in pics are 25mm Continental Gatorskin tires but I feel that 23 or 28 would also fit fine in this size of CLUG. It seems to hold securely enough, but my only critique/concern during installation is that the drywall anchors felt like they were going to bend or break when tapping them in, I wish they were a bit more substantial/sturdy so that the apparatus felt more secure in drywall. I would recommend you put this into a stud where possible thus bypassing the need for the plastic anchors entirely, but that wasn't an option for me. If it rips/falls out in the future, I will just have to grab a couple new drywall anchors and move it over an inch left or right in the same wall. In short, buy this.

Tolles Design, tolles Produkt, einfache Montage! Ich würde es jedem empfehlen, der eine simple und unscheinbare Halterung sucht! Klares Must!

El producto cumple con su función perfectamente. La rueda de mi bici es de 25 y se adapta perfectamente. Echo en falta que venga alguna pequeña pieza para que la rueda trasera no toque la pared y no la manche. Yo he tenido que poner un cartón que no es muy estético.

Ich gebe es zu am Anfang war ich skeptisch! Aber, es funktioniert tatsächlich! Kann nur empfehlen!

Molto pratico e funzionale

Ottimo supporto per la mia road bike. Se si monta come si deve la bici non muove per niente! NB: La ruota posteriore deve essere ben attacca al pavimento.