InnrZigbee Smart Plug, Works with Hue* and Alexa, Works as Zigbee Repeater, Power Monitoring, Smart Socket, 2-Pack

Bought these to help extend my zigbee network. Didn't bother with their app but essentially 30 seconds after plugging in, the plug was added to my network acting as a router. Haven't been able to test the max range but this has allowed me to connect some outdoor zigbee products to my network with no issues. Would ideally like american pricing but in the UK/Europe it's hard to get these type of devices cheap so have no complaints here

They work perfectly with Home Assistant which finds them in seconds after plugging them in near to your HA ZigBee interface during setup (IE don't need any mobile app or other proprietary cloud service to get them recognised). The fact that they report voltage and wattage being consumed (when on) is a bonus that I wasn't expecting and the neat illuminated override button on the side is helpful when testing new automations. I have now bought about eight of these for various projects and I have had no issue with reliability so far (assuming network and range issues are managed reasonably). They do also seem to be boosting the ZigBee network as any ZigBee compatible device should so the more devices you have the better the network connectivity. Very please with them so far.

I have 4 of these installed throughout the house. They were working perfectly fine but then they all just instantly stopped working at the exact same instant, switching off all my devices plugged into them around the house at the same time. They could no longer be controlled or monitored remotely. The device's ;ights were blinking, and when I tried switching them on physically, they stay on for a few seconds before switching off and start blinking again. There are no signs of a power cut or surge as everything else that isn't plugged into the devices, including other brands of zigbee plugs and sockets, have had no problem.I have tried unplugging them and plugging them back in, reconfiguring them, and re-pairing them, and nothing makes any difference. A colossal waste of money.

I own 10 of those plugs. Both this version and the older version with the override switch on the top instead of the side.I use them via the Philips Hue app and Hue Bridge unit, over the last 3 years, they have worked great for controlling table lamps annd other lighting around my house. Very occasionally one will get ‘stuck’ on whatever on or off mode it is in, and not respond, but this is quite rare, and simply turning it off and back on again fixes the issue.Highly recommended.

These plugs saves money buy easy of use and the quality of the plug

Re-review: The issues mentioned below were raised to support and an innr employee engaged with us via github with all these issues and a couple of firmwares later they are working great. Reporting is now fixed. The voltage protection functionality can now be disabled. Theres nothing left now to dislike and I’ll get a bunch more to use these exclusively for my home usage and replace my remaining wifi switches. Recommended plug and great support from innr. Thanks Gerry.Original review: I have now purchased 5 of these plugs. Connected via zigbee2mqtt and home assistant they pair fine. However they aren’t reporting the power usage states. There is a z2m github issue raised with multiple people complaining of this issue - presumably a firmware bug? of some type. This can be worked around by manually polling the plugs on a regular interval, I hit mine every 60 seconds.But they are keep switching themselves off and then back on again a few seconds later. I have at least 4 of the 5 showing this behaviour and others in the github issue comments reporting the same problem with them cycling the power. It is seemingly random but at least every day or two they randomly turn themselves off and back on again rendering them essentially paper weights as far as I am concerned and not fit for purpose.Edit: confirmed the cause is a ‘feature’ where by the plugs turn themselves off if the mains voltage hits 253v. My home is under 20 years old, in a new built estate and occasionally the voltage would appear to spike marginally above this value briefly. This is turn causes the plugs to turn off. You can imagine what happens when you have your washing machine or network attached storage array connected to one of these plugs and that happens.. I have no reason to believe my mains power is ‘bad’ and one would imagine the national grid monitor such things in substations, but nor do I have any means to change anything. All my electrical devices are fine and other smart plugs such as Hue, TPLink / Kasa and Frient (these are just the other types of plugs I own) do not behave this way and work fine. So my conclusion is the issue is how agressively these plugs are configured in their firmware. I reached out to support to see what they will do, if nothing, the plugs for me at least (and the others reporting the same behaviour) are paper weights.

I bought these mainly to act as repeaters/routers to improve range to temperature sensors. They do this very well with better range than the Sonoff USB dongle. They are remotely switchable of course, and also report voltage, current and power consumption to zigbee2mqtt. Can see when the greenhouse heater is drawing power etc. Very happy with their performance.

Pairs in seconds directly with Hubitat C7 and C8(pro)using a Tuya power plug monitor driver (can turn on/off monitoring of power/volts/current and use html attribute on a dashboard for full details).Just ordered 2 more