Tenway Baofeng USB Programming Cable Win 7/10 64Bit for Baofeng Radio UV-5R BF-888S H-777 with Driver CD

Descripción

Tenway Baofeng USB Programming Cable for Baofeng UV-5R, BF-888S,BF-F8+ With Driver CD Support WIN7/10, 64 Bit PC Features: Newest Version Support Windows 7/10, 64 Bit PC Space of two-pin:11mm; Length: 100cm; Two-pin standard diameter : Ear 3.5mm stereo (top pin); Mic 2.5mm stereo (bottom pin) Compatible with walkie talkie: The cable works with UV-5R/5RA/5R PLUS/5RE, UV3R PLUS, BF-888S, BF-F8+ Package includes: 1 x USB Programming Cable 1 x Driver CD Operation is simple (using CHIRP). 1. Install CHIRP software (latest build .exe) from their website (linked from btech site url is in the included instruction sheet) 2. Plugin the cable and wait for windows to install drivers 3. Start CHIRP software from your start menu 4. Select 'Radio'->'download from radio' 5. In the open dialog window select your port, radio manufacturer and model number 6. You will see progress bar and when it is done there will be a new tab with your radio's config open 7. Save your original config just in case you need to go to it. 8. With your config tab selected go to 'Radio'->'import from stock config' and select which bad file you want to load 9. Pop-up window will open with list of bends and memory locations, use controls on pop-up window to modify list as you need and press OK. Take advantage of buttons under 'adjust new location', these will alter all addresses in the list for you. Press OK when done 10. Verify that your address list is what you want and go to 'radio'->'update to radio' 11. Answer whatever prompts you get and let it rip. You will see progress bar going. When it is done, your radio is ready to be used with updated channel list. Before you upload to radio, you can also change settings, see there is a tab under 'memories memory range' label at top left corner.