🔍 Don't miss out on precision performance!
The ZBN Crank Crankshaft Position Sensor is a high-quality replacement part designed to fit various AUDI and VW models from 2002 to 2011. With a 12-month warranty and a commitment to quality, this sensor ensures reliable performance and easy installation, making it a must-have for any vehicle maintenance enthusiast.
| Brand | ZBN |
| Material | Excellent materials:Chips,Electronic Parts,Steel,Copper,ABS etc. |
| Item Weight | 0.02 Kilograms |
| Style | long life span |
| Current Rating | 0.9 Amps |
| Maximum Supply Voltage | 5 Volts |
| Measurement Accuracy | +/-0.5% |
| Measuring Range | λ=0.7- ∞ |
| Mounting Type | Plug In |
| Output Type | Electric signal |
| Response Time | 1 Milliseconds |
| Sensing Distance | 10 Meters |
| Specific Uses For Product | High quality usage for vehicle replacement. repair & maintenance |
| Upper Temperature Rating | 145 Degrees Celsius |
| UPC | 604270601778 |
| Manufacturer | ZBN |
| Item Weight | 0.634 ounces |
| Package Dimensions | 2.99 x 2.2 x 1.34 inches |
| Item model number | 13627525015 |
| Manufacturer Part Number | 101ZBN029CKPOSE |
| Wattage | 10 watts |
D**N
It works for BMW E83
It works for BMW E83.I purchased this in May-2022. Since then it has been working fine.For those who is going to buy and replace: do it from below the vehicle for much simpler work, you may not be able to see it directly but rely on the feel from hand though.
M**H
BMW 2007 525xi works great, transmission error and limp home fix
Its kind of a pain to install, but it works great. My car was having weird shifting at 3rd to 4th gear, and would drop to limp home mode, and show a transmission error. I would have to pull over, and turn the car off and back on. Also, it would sometimes jump and shut off while idling at a traffic lights. It seems like it would happen most often when it was raining and humid out. Turns out this sensor would stop working, and the engine computer would lose crankshaft position, which screws everything up, including the transmission and torque converter parameters. I installed this sensor and everything works great now.
A**
Fonctionne bien
Bon produit pour mon véhicule
A**R
Fixed 2007 BMW X5si E70
The BMW threw a crankshaft position sensor OBD error code and the vehicle couldn't be driven, even in limp home mode. I installed this new sensor and all is good.The sensor on the engine is quite difficult to find. I spent more time looking for it then replacing it. On the 6 cylinder engine the sensor is located near the back of the induction side of the engine, on the drivers side. In the picture above I'm using a wrench to point to the location of the sensor. It is near the lower part of the engine in the back so the end of the wrench is 6-8" above where the sensor actually is. I had to use a mirror to see it as it's under the induction system. The sensor is held in place with an E10 Torx head bolt. The bolt is single use according to BMW. It would be wise to replace the bolt and purchase a new o-ring too. Neither come with the sensor. I used a 1/4" drive ratchet with a three inch extension to remove and install the bolt, working by feel.
C**N
Not worth your money and time
The part fit yes. However it did not fix the problem. I bought the Oem from BMW and it cleared the trans issue red gear symbol code. This is one of those part where you have to go with the oem. Taking of the intake to replacethis part is timely. Do not waste your time like I did trying to save some money. Cost $ 170.00 at the dealer.
Trustpilot
Hace 1 semana
Hace 1 mes
