🚙 Elevate your Jeep’s rear suspension game with Daystar’s tough bump stops!
Daystar Bump Stops Rear (Pair) are high-quality polyurethane components designed to replace and upgrade the rear suspension bump stops on 1984-2001 Jeep Cherokee XJ 2WD/4WD models. Engineered for durability and reduced deflection under load, these bump stops ensure improved ride stability and easy installation, making them a reliable OEM-grade upgrade for Jeep enthusiasts.
Brand | Daystar |
Auto Part Position | Rear |
Material | Polyurethane (PU) |
Included Components | Daystar |
Manufacturer | Daystar |
UPC | 814423014960 |
Global Trade Identification Number | 00814423014960 |
OEM Part Number | KJ09122BK |
Item Weight | 2.04 pounds |
Product Dimensions | 17.5 x 8 x 2 inches |
Item model number | KJ09122BK |
Is Discontinued By Manufacturer | No |
Exterior | Chrome |
Manufacturer Part Number | KJ09122BK |
J**W
Perfect Fit
Bolt holes matched up perfectly, quality replacement to stock or other aftermarket brands.
M**B
Fit just right.
These fit great on my jeep where the old ones were completely gone! Easy to install once I got the old rusty mounts out.
J**T
Another Quality Daystar Poly Product - See Install Note!
Daystar makes good stuff! As usual I was not disappointed and these bolted right into the factory location with factory hardware. They are poly so normally that would make hitting this bumpstop harsher, but not so with the cutout ends - it eases the impact.Important Note: THESE ARE EXTENDED BUMPSTOPS! THEY ARE 4 INCHES TALL! I could not find that information anywhere, so if you do not have a suspension lift, these will limit your suspension travel! If you have a 2" or higher suspension lift kit installed and are running larger tires these are just the ticket!
J**Y
smart design technology, better than new.
fit perfectly, with new Gabriel Ultra shocks,the multistaged design gives better controlled resistance going over speed bumps. Better design than the original which lasted 25 years. They will probably outlast me. reasonably priced. 10 minute job on my XJ as didn't even have to jack it up.
C**.
Nice quality bump stops
Great bump stops much beefier than stock. Installed easily in my 2000 Cherokee. I used an impact (for the vibration vs power) to remove the old broken bump stops, since my Midwest Jeep has quite a bit of rust and I didn’t want to snap the old bolts off.
J**C
The advertised length is not really what you end up with.
Good quality bump stops. Great choice if you need just a little extra length.I would like to say that they are perfect, but the cutout section on the end collapses very easily and can’t truly be counted as the full length on these. You may need to add more below to compensate.
J**N
Fit perfect
These bolted right up where the original rotten bump stops were located. I did spray some pb blaster in the unibody rails to allow the bolts to soak before hand. Had no issues after that. I have a rubicon express 3.5” lift and these should work perfect
G**V
Fit stock location!
Needed some new rear axle bump stops for my Cherokee XJ. Wanted something better than the stock foam rubber ones and I decided on these Daystar bump stops for the XJ. These should last longer and keep my XJ from over flexing.
Trustpilot
Hace 1 día
Hace 2 semanas