Be Quiet MC1 Pro M.2 SSD cooler, heatsink with heat pipe, for single and double sided 2280 modules, BZ003

What a nice product. Easy to follow instructions and screwdriver that works for full installation process in a PS5 provided. My Crucial SSD fit perfectly in this, which had no issues fitting in PS5 (and you can replace the PS5 SSD cover on top should you wish to).The screws to secure the heatsink are tiny, but work in a bright environment, and magnetised to provided screwdriver, and you should have no issues. I like that they are packaged in a compartment behind tape, it's little touches like this that make sure nothing goes missing.Drive works OK with no overheating, though I'd expect it to anyway - however other reviews here shows it is effective in keeping temps down.For a similar price to many cheaper products, provided with rubber bands and the like, this is way better and still provided at a good price. Highly recommended.

Two arrived today and installed on my k8 nucbox. Gen4 nvme went from 70+ degrees to 35-40c and the same for the Gen 3 nvme inside as well. I had some doubts about these as the two NVME drives are side by side and chose these as they were fanless and lock together with small screws. Needless to say I am well impressed with the thermal capacity of these heatsinks. Remember to peel the protective film off them and the notch goes to the screw side of the drive.

The heat sync seems solid and easy to fix. However does not come with M2 standoff screw to secure to motherboard. Some motherboards come with clips and or heatsync's, check before you purchase. Just fitted mine and now waiting for the M2 stand off screw to complete job.

For the size, the cooling performance is incredible.

The heatsink works well and is very easy to install. Includes all the necessary screws, as well as a spare and also includes a screwdriver to assemble. It's a little bit chunky so you have to check the space for it, but it fits snugly in mine and keeps my SSD running cool.

I was noticing my SSD temperatures were higher than I wanted. Even at idle I was seeing temps in the mid 50C range on the stock MB coolers. I saw an online review of these and they have made a great difference. At idle, temps are now in the high 20C range, with peaks of high 30s. Well worth it for me for longevity.

Really happy with these (purchased two). Easy to install and each pack comes its own teeny screwdriver to aid the installation. They look great too. Cannot speak for thermal efficiency but it felt like a snug fit after I sandwiched the M.2 card into it so will recommend if you want a more asthetically pleasing look of your M.2 drives in your motherboard.Theee months later update: thermal efficiency appears fine even in the crazy heatwaves here in the UK. Still recommend these!

Design is unobtrusive, installation is as easy as 4 screws put in.The thermal pads are forgiving, so you don't have to put it on your ssd with 0.1mm precision.Having an NVMe Samsung 980 evo just a slot above a GPU monster made it heat up to ~60 C under full GPU load,with this cooler, you get 55C - that's 5C less.The screwdriver is included, it's fairly neat.MC1 PRO gives you performance of coolding down to 53C, so the price difference is justifiable.PRO versions is a lot thicker but headpipe isn't visible once you put it into motherboard.Handles top-end GPUs well, couples even better with stock/top-down air coolers.