Desertcart
Explore

from USA
to Ecuador
in 5-8 days
At your doorstep by Jun 24  to Jun 27 with standard delivery

Description

  • Panel-mount tachometer accepts input from a variety of sensors such as NPN open collectors, contact sensors, square wave sensors, and sine wave sensors for measuring rotational and linear speed, elapsed time, and process time.
  • Selectable input signals and display update time allow the operator to monitor, control, and analyze a wide variety of processes.
  • Six-digit red LED display with a selectable decimal point and two secondary six-digit displays presents test results.
  • Front cover is rated to IP 66 level of protection against dust and high-pressure water jets.
  • Panel conforms to 1/8 DIN size for industry-standard mounting.
  • Imported from USA.
The Shimpo DT-5TS panel-mount tachometer with 100 to 240VAC power accepts input from a variety of sensors, includes selectable input signals, and has a six-digit red LED display. This panel-mount tachometer accepts input from NPN open collectors, contact sensors, square wave sensors, and sine wave sensors, and is used for measuring rotational and linear speed from 10 to 99,999rpm with accuracy to + or - 0.008 percent, as well as elapsed time and process time. Selectable input signals and display update time allow the operator to monitor, control, and analyze a wide variety of processes. The six-digit red LED display with selectable decimal point and two secondary six-digit displays presents clear test results. The front cover is rated to IP 66 level of protection against dust and high-pressure water jets, and the panel measures 1/8 DIN according to Deutsches Institut für Normung (DIN) and International Electrotechnical Commission (IEC) 61554 for industry-standard mounting. This tachometer tolerates a voltage range of 85 to 264VAC at 50/60Hz and can utilize an existing power transformer, and it provides DC voltage to power-compatible sensors. It comes with mounting adapters, mounting screws, a decal sheet, and instructions. This tachometer is suitable for measuring rotational speed and other measurements in mechanical or industrial engineering environments. Specifications -------------- Range 10 to 99,999rpm (at 1 p/r), 0.2 to 30,000rpm (at 60 p/r) Accuracy +/-0.008% +/-1 digit Display update time 0.2, 0.5, 1, 2, 5, 10, 15, 30, and 60 seconds (selectable) Input signal characteristics NPN open collector maximum frequency 100kHz; contact closure maximum frequency 20Hz; square wave maximum frequency 30kHz; sine wave (magnetic pickup) maximum frequency 10kHz Sensor power supply 12VDC (150mA) Working temperature 32 to 113 degrees F (0 to 45 degrees C) Weatherproofing IP 66 Power requirement 85 to 264VAC (50/60Hz) Dimensions 1.89 x 3.78 x 5.27 inches/48 x 96 x 134mm (H x W x D) Weight 0.66 lb. (300g) H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. Tachometers measure the rate of rotation or surface speed of motors, conveyor belts, and other moving systems. Contact tachometers take measurements through direct contact with the moving surface, and can measure both rpm and surface speed. Typically, contact tachometers come with a range of attachments that can be used to measure speed on different kinds of rotary systems, which may include tips used for measuring shafts with a central hole or flat end surfaces, and rotary wheels for measuring conveyor belts. Noncontact tachometers take measurements from a distance using a beam of infrared light, and provide highly accurate measurements. Contact tachometers are an excellent choice for dirty and dusty environments; noncontact tachometers only calculate rpm but are considered safer because they do not require the operator to be in close contact with the moving surface. Contact/noncontact tachometers, also known as dual, or combination tachometers, can be used to take contact and noncontact measurements. Some tachometers can also take other types of measurements, such as count or frequency, while others can output data to a computer for analysis. Tachometers are used in applications such as automobile maintenance, mechanical engineering, and maintenance of industrial equipment. Shimpo Instruments manufactures force, torque, and speed evaluation instruments. The company, founded in 1974 and headquartered in Itasca, IL, meets International Organization for Standardization (ISO) standard 9001. What's in the Box? ------------------ * Shimpo DT-5TS panel mount tachometer * Mounting adapters * Mounting screws * Decal sheet * Instructions
Reviews

Shimpo DT-5TS Panel Mount Tachometer, LED Display, 0 Output Modules, +/- 0.008 percent Accuracy

Quantity
1

Disclaimer: The price shown above includes all applicable taxes and fees. The information provided above is for reference purposes only. Products may go out of stock and delivery estimates may change at any time. Desertcart does not validate any claims made in the product descriptions above. For additional information, please contact the manufacturer or desertcart customer service. While desertcart makes reasonable efforts to only show products available in your country, some items may be cancelled if they are prohibited for import in Ecuador. For more details, please visit our Support Page.