yinfenteGuitar Neck 22 fret 24.75 inch Electric Guitar Rosewood Guitar Fretboard Binding Headstock Block Inlay

Built a custom body from scratch and needed a flying V neck. Tried this one out, and it fits great, stays in tune, truss rod adjusts as needed, and feels great to play once the frets are filed down to where I like them. Picture of the back of the guitar shows the neck installed, don't mind my crappy glue/finish job though

For a relatively inexpensive neck, this is a very good neck. It arrived perfectly straight. The scale is accurate. The fret edges are properly beveled (though a couple need to be recrowned), the frets are solidly seated, and the fretboard does not contain any dents or chipouts. The fretboard binding is done very well. The headstock binding is also done quite well, and is flush with the face of the headstock. There are no gaps or bubbles in any of the binding anywhere on the neck. The inlays do not have noticeable filler around them and look good. The tuning holes are drilled straight, and they are properly spaced/aligned. The scarf joint where the headstock joins the rest of the neck is near invisible. All that's required is some very minor fret crowning in a few places and some minor fret leveling. I definitely recommend this neck if you aren't building your own.

The neck is made with good quality wood and feels smooth to the touch. The truss rod works well and allows the neck to be adjusted so that the neck is straight. My only complaint would be that the nut seems to be made of cheap white plastic, but it can be replaced with a higher quality nut if desired. The binding is flush against the wood. The inlays all look decently realistic. Would buy again.

This guitar neck isn't packaged very well, there's not enough padding to prevent the neck from breaking during normal shipping. The first one I ordered had been damaged in shipping so I ordered a replacement. The broken neck is pictured with this review.The replacement neck had improperly located bushing holes for the tuners. It would require gluing new plugs in and redrilling the holes with a press I do not have. The attached picture shows the problem with the replacement neck, with a straight edge along the back of the exceptionally tall nut for reference.On top of those issues, the fretboard is so light in shade of color that I suspect it may not be Rosewood. I know Rosewood will have some color variation but this one is so blonde that I wouldn't have ordered it. Doesn't match the representational photos at all.

Decent neck, needed more work done than just finishing it however. The tuning peg holes were not the correct size so they needed drilled out again and the area at the bottom of the neck where it gets set into the neck pocket was slanted which made it sit out of line of the bridge. The neck had to be set at an angle because of this. However for the price these things can be dealt with just know its not going to come perfect and will need work done to it.

Yeah, the only complaint about this neck is how the tuner holes are drilled......common review complaint. I sent mine back weeks ago for a replacement and it still hasn't shipped........yeah, good luck with that right. I won't be using this seller ever again. Update.......the replacement arrived today. I'll upgrade one star to three. Is this neck any better? Well, it appears to be, but it's close to being off by the naked eye, but I can make it work if I'm choosy on the size of the tuners. It's the last neck I buy from Yinfente. Remember......you get what you pay for.

I studied the photos, Qs&As and reviews.Ordered April 22, received May 5.Tuning peg holes are +10mm round and they are square to the angled head stock.The truss nut has the ONE turn adjustment.All of the frets and the binding don't rattle when I slap the neck.EDIT:Now that I've stained and clear coated the neck, there is only 1/2 turn on the truss.I'm looking forward to when I got it under string tension.

Neck is straight as an arrow and matches listed dimensions perfect. Very happy with the quality and build on this! It is the closest replacement I could find to replace the broken neck on my Stagg. Super stoked with how it's turned out! Also, shipping was around 30-40 days but it shipped from Kentucky and was on my doorstep in 3 days!

Extrêment déçu pour le Body, manque d'épaisseur 413mm. mais le Fretboard est bon sauf bridge trop épais, (to big) Graphtech Tusq Nut 1 11/16 » Fente Martin L/H PQ-M600-L0, Épaisseur: 7/32 » (5.79 mm); Longueur: 1-23/32 » (43.41 mm)Hauteur: 3/8 » (9.17 mm); Première à dernière corde: 1-3/8 » (35 mm)devrait être plus petit.

OK then, first impressions are pretty good, one piece neck nicely sanded needs oil finish. Frets are situated nicely and just a couple need filing edged. Inlays are fine and edging very nice. Well I’m fairly impressed. Just a bit of work and I’m sure it’ll stand up to good playing feel. Oh and packaged well with swift delivery.Give it a go, hope yours is just as good!🙂

Bonjour , le colis est arrivé très rapidement ,la finition est propre , rien de gênant à signaler , les frettes sont de type jumbo , profil manche en D pas trop gros , j'ai pris le diapason gibson , le bois est brut donc je vais essayer de l'amincir encore un peu ,reste plus qu'à lui donner vie !

Absolument génial, très content de ce produit !

I ordered two of these necks to go onto a custom built guitar that has a deadline. I bought two in case one was damaged or something and I could use the other one. turns out they are both not usable. First one has 9 frets that are lifted with debris underneath them and the other has to have the nut replaced because it was glued in crooked. Not buying this crap anymore! Now I have pay a luthier extra to fix someone else's lack of pride! buyer beware.