Ove Decors Freestanding Bathtub in Glossy, Contemporary Soaking Tub with Chrome Pop Up Drain and Waste Overflow, 70 inches, Rachel 70 White

I’m 5’11” and finding a freestanding tub that was deep and long enough for me to stretch my legs out was hard. This one is perfect and great quality. The drain assembly was poorly planned so we changed out the drainage hoses. Other than that, we love it. Sleek design to fit modern or vintage styles of decor. Best price I was able to find as well and it’s the same manufacturer you find in home improvement stores. You can’t beat the value!! Would definitely but again if I add another bathroom in my house

I could not get my plumber to install this so I tackled the installation myself. I mounted the faucet on the flat deck at the foot of the tub and there is sufficient room. Be very careful choosing the faucet as there is only enough room for about a 6 inch profile for the rough in valves.The 6 inches is measured from the bottom of the deck to the lower end of the valve. Anything larger and it will hit the side wall of the tub. I used PEX and it required several (4) elbows to stair-step the pipe from the valve down to the floor. It would have been much simpler if the manufacturer had provided a good profile drawing and even some recommendations on valves that would work. The instruction only say that the faucet should be installed 2 inches from the corner. Well there is no corner, that part of the tub is rounded. I used a KOHLER K-300-KR-NA high flow valve but modified the spout washer so that I didn't need to solder it in the installed position. I would be best to choose a faucet that can be fully installed from underneath the deck. I celebrated the completion of the install with a nice Oregon Pinot noir.

Looks nice. Super light so moving into place was a breeze but that's also where the problems begin. There is no way to anchor this down to the floor since it is so light so any bump or brush up against this tub will cause it to move. The only point of contact it has is the drain line and a drain line is just not meant and shouldn't be use to secure a large tub like this. I consider this a major design flaw. Make a way to anchor it down or secure it to the floor in some fashion once you have it all set and leveled. We used contractor grade silicone on all the feet for the tile floor, then filled it up with water and left it for a few days to really keep it down. This didn't keep it anchored all the way but the silicone does a good job gripping the tile so at least it doesn't move without a major bump or hit to the unit. Good luck if you decide to purchase this unit. You'll love the looks but will be disappointed if you can't get it to stay in place right.

Comfy and well made. Only two items I would change. I’m 6’4 so I wish it was a tad longer. And we had to afix tub to tile floor because it is light and moved around.

First of all I will comment that I am a serious perfectionist and I am always Leary on an item with a good price as I expect a quality product. I will say that this tub has delivered in many ways. The quality is excellent. It arrived in good packaging and was shrink wrapped and padded underneath the cardboard. The directions for installation are somewhat lacking, but if you put common sense approach into the equation it is quite simple for you or your plumber to install as long as you level the bottom adjustable feet prior to installation. There is only one drain as the overflow connects into the built in drain so that definitely simplifies it for the plumber and costs of install are less. After installation the tub is beautiful! This is a large tub overall in size but when you are in it, it feels not too large on the inside and fills quite fast with water. I would not only recommend in comparison to other tubs out there, but I would highly recommend in terms of quality and look to compliment your renovation as it did mine.

Next time I won’t get an acrylic tub. It attracts dust which clings to it. I have to wipe it down before every use. The main issue is the hot water won’t get hot out of the faucet. I tried maxing our the limiter and turning up my tankless water heater, but it barely improved. Every other fixture in that bathroom gets hot water quickly and easily. I tried turn off/limiting the cold water supply, but then the flow either got very slow or stopped. The only way I could achieve hot water was to swap the hot and cold and turn the handle to “cold” supply with just a hair of hot.

so after our major recent master bath remodel we had this tub waiting for marble to be laid down. when we got to installing the tub as it was represented that you could surface mount on the top of the tub, or have a wall mount spout or have a free standing faucet type. Due to our area constraints we decided to go with the surface mount on the top of the tub as depicted in some of the product photos. So I purchased a $700 brushed nickel tub faucet set at Pacific sales. As we started to install the valves we hit a huge problem...the front angle of this tub is at such a sharp degree that the 9" bathtub valve would not fit into the sleeve of the tub...further guess what bathtub valves are not available in any shorter length so we we screwed. We tried to install one of the sink valves which are shorter but they do not generate enough water to fill the tub in less than 30 minutes. I respectfully ask for a refund as you cannot surface mount "bathtub spout & fixtures" on this tub as advertised. please advise

My tub arrived and is as beautiful as shown in pictures, glossy and white. I was surprised that there was a small lip that goes all along the outside of the top of the tub,instead of being one solid piece, which does not show in the pictures. But for the price it is beautiful and I am happy with it. I did price similar tubs at a plumbing supply house, and solid tubs similar to this one are over $2500. It is very comfortable for reclining.