DANCO Replacement Tub Spout with Diverter, Chrome, 5-Inch, Fitting 1/2-Inch or 3/4-Inch IPS, 1-Set (80765)

I used this to replace one that looks identical but the new unit feels lighter. After screwing it in the diverter valve actuator got a lot stiffer an its stiffer than the old unit. If you are buying this be aware that it uses a threaded fitting it is not a slip on unit. It accommodates either 0.5" or 3/4" ips pipe fittings via the supplied adapter a 3/4" threaded pipe actually measures approx 1" over the threads if you are checking the mounting. It is important the pipe stub sticking out from the wall be much shorter than that required for a slide on unit. Eyeballing mine it stuck out about 1/2" or maybe a little more

Great price, great instructions, hard to find in general stores. Easy enough for a non-plumber girl to install. If you have a longer valve stem just don't forget the separate trim piece.

Sept 2024: Plumbing in my home is from the 1960s. It’s very difficult to find fixtures that fit. The spout fits perfectly. Aug. 2025 Update: the shower diverter broke, it lasted only 11 months. Had to order replacement spout.

Item looked just like the picture, so that was great. Descent quality (time will tell - I will update if it does not hold up). Easy to install. Diverter for shower worked perfectly.

Worked great!

The plastic threads cross-thread very easily! Wrecked this one in a heartbeat !!!

This is metal-plated plastic. The one I am replacing was installed 50 years ago, and was cast metal, with a plastic threaded insert in back. What I dislike about the style of both the old and new one is that the interior stays filled partway with water, since it is a tapered structure, with a larger diameter at the wall end. That is where the water stays. They could have engineered that better, for sure. But, it works, and has no demands except the simple flow diverter, which just needs to work, and it does. "Next!” 😃

Worked until it didn't. It worked well for 4 years. Then yesterday the pull pin broke. A small piece of metal fell out of the spout. I temporarily fixed it in shower mode with some silicone adhesive until I can get a new one. It did its' job as it was designed until it broke.

Came with an 1/2" -> 3/4" adapter (that we didn't need), and was VERY easy to install. Took about 5 minutes, we haven't seen any leaks, works great, and seems to be of sturdy quality. Shipping was super fast, highly recommended!

Me gustó su característica de adaptabilidad y facilidad para instalación y lo usé para mi tina de baño personal.

easy to install

Product works fine and service from Amazon is great. The diverter in shower mode drips water slightly out the faucet. Other than that the product works fine and installed well. It's only a slight trickle and has no effect on the shower pressure.

Says that it made of metal, but it feels very lite also very thin not sure could be hard plastic, I installed it a few days ago and so far it’s working great. I had to change the pipe that connects it for a shorter one, wasn’t too hard. Took me about 10 minutes I bought a second one to have as a spare, because I am unsure of how long it will last