K&N KN-171C Harley Davidson/Buell High Performance Oil Filter

Correcte en snelle service

Au top super pratique pour changer les filtres

Muy buen producto. Recomiendo comprar en descuento llega a estar en 350MXN aproximadamente Usado en Harley davidson.

These are the best oil filter for your harley davidson

Not all oil filters are alike! The K&N oil filters are well built with very good internal filtering components. Easy to install as easy to remove. Step #1: remove the screw and completely drain the motor oil. Step #2: install the screw back in place with a new rubber O’Ring. It cost less than 0,25 cent for this most important piece that keeps the oil from leaking out of your motor. Oil filter installation process: life lesson - Step 1: a) lubricate the rubber seal with new oil; b) always fill the new oil filter with new oil until the oil filter is filled before installing it. This will ensure your motor to get immediately the oil it needs after an oil change. You will prevent your motor from the next start from internal damage to take place due insufficient oil flowing after the oil change. Step 2: clock wise, install the oil filter (manual hand process) to avoid damaging the filter threads and then use the 17 mm welded hex nut to tight the filter (turn between 1/2 ro 3/4 turn), no more. To remove the filter: Step 1 - use the 17 mm hex nut and unscrew the oil filter (counter-clockwise) and finish the removal in a manual hand process. My Harley Davidson, 2014 Ultra Limited remains in great condition! a 17mm welded hex nut can be used for quick and easy filter removal.