YaeCCC USB Isolation USB Digital Isolation USB to USB Electrical Isolation Industrial

The product did operate OK with very low power devices but anything attempting to draw more than 100mA fails with a brownout warning. As such the None of the ESP8266 or ESP32 boards will operate. It does not have the ability to have power supply fed in from independent supply.

Eliminated my ground loop and seemed to work great until system called for 24bit 192 then system would stop recognizing my teac dac. Otherwise worked great especially for the price.

I have a amateur radio that uses USB interface to PC for control, but a lot of RF interference was coming through the USB cable from the radio to the PC. This isolator helped to reduce the noise coming into the PC from the radio.

I am a test engineer. I used this device to isolate my test fixture from my PC to protect the PC. . However It would only work for a minute or two and then I would get communication errors. The only way to resolve the communication errors was to uninstall the driver software and reinstall it. This device may work in Some applications but if there are any even small spikes in potential between the computer and the isolated device this device malfunctions.

We make x-ray equipment going to over 160kV. This prevented frying a computer during some very nasty arcing and destructive testing of components.

Not sure the reason yet, but does not work with Focusrite Scarlet 6i6.

Using these to isolate USB-RS232 adapters, they are working great for that.