Ultimate Arms Gear LimbSaver CrossTech FN FNS FNX FIVE SEVEN IWB/OWB Clip-On Universal Multi-Fit Ambidexterous Pistol Holster 9mm/.40/.45 Mag Pouch

Really impressed with the Limbsaver Crosstech and the ridiculously low price! From PA tactical it also came with a mag pouch!Out of the box in the OWB setup it will fit just about any size pistol you could put in it. Fitment could be somewhat tight with a larger frame revolver but the rubberized polymer material does have some give and will loosen up with use. I had no problem getting my FNS Longslide in it on my hip at 9 O'clock ( lefty here ). Without adjustment retention is wonderful for a larger pistol. The cant and retention can be customized all kinds of ways by placing the bolt screws in all the different pre drilled placement holes.The truly awesome part comes in when you form fit this thing to a particular pistol. For me i switched the clips ( which are awesome. Heavy duty polymer that retain their shape and tightness and fit over a 1.75 inch leather belt ) to the other side of the holster for IWB carry with my Taurus PT111 G2. I set it up for a nice tight fit with a little forward cant and just enough room for an easy draw with all my fingers on the grip. Placed the adjustment screws where i wanted and then ( with the firearm cleared and mag removed) i hit it with a heat gun per the included directions. I used mine on high about 6 inches away and in about 4-5 minutes i could see the polymer start to shape around the gun! Stopped to double check the fit and then a few more minutes of heat and then let it cool. 15 minutes later i have a custom fitted holster for my exact firearm in the exact position I want it to be. Now the gun will draw and holster flawlessly and stay nice and tight! Even IWB after you mold to fit it doesn't bind much at all, and as long as you are mindful when re-holstering (as you should be with any holster) it goes back in nice and easy! If you want to put a different gun in just repeat the process and it will be custom to the next one! Screws all seem to hold nice and tight and the backing doesn't irritate your body when worn.For the price and the customization factor alone this is awesome. For the fact it actually works great and is made in the USA I say go out and get one! This will literally replace a drawer full of holsters if you take the time to do fit it right.