LED Intelligent Lighting Timing Dimming System LED Dimmer Controller Modulator For Aquarium Fish Tank

Descripción

Features Color: as shown. Material: Plastic Product connector: 5.5mm DC male with lock thread. Product size: width 6.5cm . Applicable to: compatible with conventional 36V under 100w with constant pressure LED lamps. Installation: Before the installation, confirm the power supply and power of the lamp, which is lower than 36V&100W. Check the interface of the lamp (5.5mm DC master lock), and connect the modulator in series between the lamp and the power supply. Step 1: Open the package and remove the dimmer. Step 2: Connect the dimmer to the LED lamp. Step 3: Plug in the power to automatically turn on the dimmer. Step 4: Set the dimmer parameter. Key function description: 1>. ON/OFF Switch the light on/off. 1>. ON/OFF Switch the light on/off. Long press enter time to adjust the interface, by pressing + and - adjusting hours and minutes. Brightness increased 3>. HOUR/L- Brightness decrease 4>. MODE Press the manual/automatic switch, long press into the timer setting. Press the manual/automatic switch, long press into the timer setting. NO-1 and time cycle flicker, through + and - for the first set of time Settings. Press MODE key again, L000 flicker, through + and - for the first set of brightness Settings. Then press MODE key, NO-2 and time cycle flicker, through + and - to set the second set of time. Press MODE key again, L000 flicker, through + and - to set the second set of brightness Settings. In this way, 8 sets of data are set. Press MODE to exit after setting. P.S. If the time is set to "-- : --", the data on behalf of the group does not work. 5>. Display L00*/ time back and forth indicates that the system is in manual state.