- Champion Range and Target 40901 Champion High FlyString Release Manual Trap, Multi

Most of these throwers are basically the same, if you put it together right and set it up right they work fine, if you don't, you are in for a bad time. It took about 5 minutes to assemble properly (yup, even with directions and pictures I managed to put one of the parts on backwards and used the wrong bolt inside the spring). The main thing I can say is the unit needs to be stable to do its best work. I was using it alone with my foot on the back for stability which didn't work well at first, the unit jumped every time I pulled the cord and how much it moved dictated how bad the clay flight was. Then I moved over so that the front legs were hooked on a concrete parking barrier and I was standing with my foot on the back leg. Not only did it start working flawlessly. In fact, with every throw the legs dug themselves a little deeper into the gravel parking lot that I had been unable to stomp them down into at all making the unit more accurate and more consistent. After the first few awkward pulls of the cord with my hand I started standing on a fairly taught cord with my right foot and using my left foot that i had on the back of the thrower for stability to step on the string between the eyelet and trigger to release the clay. After a few minutes of that, I decided the foot 'pull' was the way to go so (as you can see in the pictures) i wrapped the string around the angle iron and now it works like a pedal. It threw consistent singles and doubles all day. The only clay it broke was one that slid out the back when I put my foot on the thrower before the legs properly set into the gound (I was using the highest angle)

Good quality thrower, been using it all summer and no issues.

If you are looking to get into skeet shooting, without the $250 price tag of a competitive trap, you are in the right place. Trap comes in a small box with full assembly required. Basic tools for assembly. Trap is sturdy and built to last. Throwing arm has a small padded strip to prevent brakage when throwing. Spring can be tightened or loosed depending on your shooting level. Can throw 2 birds at once without any problem. This setup can be mounted to a tire with included hardware or can be pushed into the ground, however seems to pull out after every throw(just put your foot on the back stake when throwing and it will be fine). Trigger releases nicely without much effort, but the string that is attached wears out pretty quickly. End of the trigger string has a guage to keep the throwing arm width correct. Cocking the throwing arm can be tiring after a day of throwing, but it throws nicely. On average, no wind it will throw 100 ft without a problem. Amazon price is competitive, usually a buck or two less than the major retail stores. If you are new to the sport or are just looking for an inexpensive thrower, you are in the right place. This one will do what you need and will hold up well.

Had one years ago. This feels just as sturdy. Kids unwrapped it Christmas morning, along with their new .410 semi-auto. Took about 15 minutes to assemble thrower. No issues. We went outside and within two or three shots, the kids were turning those clay pigeons into so much dust. The thrower is consistent, which is important when teaching new trap shooters. You want to know where that clay is going so the shooter can predict its flight path. As i set the clay in the arm, i knew exactly where i was about to send it. That condistency is key. It throws doubles just as well. Just put a few more turns into the spring to account for the added weight. Path and separation very consistent. After a couple doubles, the kids were asking for two every time and they were busting them. Im really happy with this thrower.

If you are looking for a competition grade fully assembled thrower, this ain't it. If you want something super affordable and are willing to assemble and mount your thrower this thing packs a punch. Our 1st time out with this thing we mounted it to a spair tire and threw 400 clay in an afternoon. Most of the bolts came loose. I applied a little loktite to most bolts and cranked down on the locking washers. The next time out we spent a whole day with 15 of us shooting clay off this thing. We threw a 1000+ pigeon and only lost the eye bolt for the pull string. Everything else stayed right and tight. 3rd time out I had tacked a small pipe to the frame for the pull string and mounted it to a larger wheel. With some strategic crimping on the throwing arm we got that sucker throwing doubles like a dream. It's going to break at some point but I have already gotten my money's worth.

For the price it’s a great value. For the occasional skeet shooter it works great. I bought one before and used it occasionally and then had a men’s fellowship event with it which did it in. The throwing tray(for lack of better terms) broke. I’m buying another one because of the value. Hopefully this one will last longer lol.

Fourth of July just got better!! Works like a charm. My 5 year old lives to load it for us and pull.

ABSOLUTELY TERRIBLE PROCUCT If there was a no star option I'd pick that. Instructions are terrible, everything is loose and it barely throws one skeet properly more than that good luck!! You'd better be good at manufacturing just to get it together and have extra parts for it when they all loosen up and fall off. Spend the extra money and buy a different product I know I wish I did.

Again it arrived in time and did everything it said it would.

For the price, it does exactly what it should. When launching 2 at a time, it is a little less reliable. The 2 clays go completely different trajectories, but still launch well enough you can hit both if you are quick enough.

Great for beginners, works perfectly with 1 clay 2 fly not so great but great value for price

It throws clay so I don't have to. Do you know how fast you have to be to throw then pick up your weapon and still have time to hit it ?? I walked up and shot them on the ground later. Don't call me a poor sport.

In terms of functionality and build quality, I can confidently say that it is definitely solid with the exception of making sure every screw is as tight as possible. As fart as launching the clay targets goes, for every 5 targets launched, 2 shatter. I have tried to seat the clay targets in various locations in the launcher however the results remain the same. For a cost effective launcher, I would say its worth the money however, there are better alternatives for a slightly higher price tag. When mounting in the dirt, I recommend stepping on the rear as well as the left side because the launcher's recoil does lift it out of the ground. I can confidently say that this will function better and deliver more consistency than using the manual hand launcher