1 Sets Console Cable for Nintendo Switch,Upgradable Replacement Parts for Switch NS Console (Support HAC-001 and HAC-001-(01)) with Repair Tools

Excellent! The quality is good, and the installation was quite easy. However, be PATIENT with yourself. Ensure you use the best flux to solder all your joints and have the best thermal paste. Please Please Please update to version 2.80. You won’t have any issues in the long run. Many people choose to keep the current firmware, but there’s a reason for the update. The firmware creator provides a detailed guide on how to install it. The function is simple and generic. Be very careful not to bend it too much, as the inner wire will break. So be very gentle as this is like surgery. I suggest cutting your metal back plate so that your chip can lay flat and won’t put pressure on your switch back cover. Guys, use anti-static tape and make sure your chip doesn’t touch any other metals in your switch but don’t cover it all as it needs to breath. This will burn your C1 chip, which was meant to break if there’s some kind of static or extra voltage. Once broken, it’s a mission to replace it without proper tools. Overall, guys! Enjoy and remember… take your time. At least 3 hours to make your switch the best thing you’ve ever had.

worked great! installed this on my mariko switch over the course of ~3 hours. - make sure you have a 128gb+ sd card if you are going to be using emuMMC - read the ifixit guides on disassembling the switch, it will help a lot - read through the nx-modchip guide to make sure you understand everything before you start installation - for removing the ihs gently pry from each corner using the blue prying tool - get any microscope for soldering it doesnt matter if its expensive or not just any will help a lot

Installation went great! I installed it on a V1 switch, and they include V1 and V2 ribbon cables in the package I wanted to give some others a few tips on the install. Any bad reviews or it not working was most likely due to user error 1. Flash the board with the latest picofly firmware. Some say the board comes pre-flashed, but mine wasn't but its super easy to do, and I'd reccomend flashing it with the latest firmware anyway just to stay up to date. 2. Be careful of the two capacitors next to to APU when removing the shield. If you knock any of those capacitors off, you will lose WIFI abilities (learned the hard way unfortunately) 3. Flux is MANDATORY! Any solder work you do should always have flux, it makes the process so much better. Watch a few YouTube videos, not just one, and develop your own technique.

I had firmware trouble and had to load firmware multiple times in order for the chip to take!! Very important to know because I thought I had issues with my soldering and was getting no led lights from the chip. Finally got version picofly version 2.75 to take, booted up and got the “no sd card” screen! Other than the few hours troubleshooting, works great!

good mod kit for nintendo switch non led model. Kit uses a pi chip to program the switch.