Gliston Auto Dent Puller Kit - Adjustable Golden Dent Remover Tools Paintless Dent Repair Kit Dent Lifter Puller for Car Large & Small Ding Hail Dent Removal

Due to a blemish on my new refrigerator, Lowes gave me 50% off just to keep it. I happily accepted because they refunded me nearly $1,500. I decided to try this $37 kit to see if I could make the dent less visible. The kit is surprisingly high quality for the price. The key is patience. The tab will come off after a certain amount of pull pressure is applied. This allows you to check your progress. I glued the tab on 4 times to get the dent out. The next part was much more time consuming. There was a slight bubble left from pulling the dent out. The kit comes with a rubber mallet and tools to tap the metal flat. This took me over an hour to get the metal perfectly flat as stainless steel is very unforgiving with light reflection. I was pretty happy with the result as it greatly reduced the blemish by at least 80%. Just enough not to look terrible! Great product if you are careful and have patience!

I have a folded in rocker panel in the center of my car that has broken my heart. I started researching and practicing PDR to fix it. So far i've been doing quite well and it's almost completely repaired with this glue. It's the only glue that has the strength to create a strong pull to get the metal back to it's original shape. It comes at a price as it's cheap but not super cheap. Thankfully each stick is very long! Though I had to purchase a really good glue gun to properly use this stuff. But after doing so, performance has been VERY GOOD. Don't use a cheap crappy glue gun. It'll make doing PDR much easily with a quality Glue gun. I've used about 2 sticks so far and it has almost fixed the bad damage so 10 sticks should definitely be more then able to fix it. Highly recommend this stuff. Make sure you follow the requirements and exceed them for best performance! I use a 300watt glue gun that is industrial grade. Gives me more time to apply as this stuff likes to harden FAST! So far Alcohol 91% has done a great job at mostly cleaning this stuff up. Sometimes it can be a fight and this stuff is strong enough to remove paint so be careful.

After a freak hail storm, my fairly new car had about a dozen dents. I didn't want to file a claim with insurance so I figured I'd try this first. It takes a bit of practice but it does a decent job. Make sure your car is either in a garage or in the shade. If the metal is warm at all the glue won't stick. You'll need to pull the dents multiple times but it does work. I have a few that came out completely. Most of them came out enough that you can't find them. You definitely need to have patience but it does work.

Save your money. The glue does not stick to your vehicle and is pointless without the glue sticking, it pulls right off even after letting sit for several minutes.

I got to use this kit for the first time today to remove a good sized dent in the corner of a fender. I was impressed with how strong the pulling tabs and glue are, the small body hammer and tapping tools worked nicely also, but was disappointed to find that not all components of the bridge are up to the task. The reason for three stars is because the bottom handle of the bridge, which pivots and does the actual pulling motion, is machined from very soft pure aluminum and wound up bending severely at it's weakest point (where the pulling rod goes through the channel milled through the middle of the handle) on the very first pull. While the rest of the bridge is exceptionally sturdy, the bottom handle should be manufactured of a stronger metal, I suggest some grade of steel - bar, mild carbon, stainless, chrome vanadium... doesn't need to be super hard, just stronger than the aluminum which the current design uses. I do not intend on returning this kit, or even asking for another bridge (which will only fail again in the same manner). Instead I'll make my own replacement handle to install in place of the original failed component. Hopefully the manufacturer will be notified about this flaw and select a different pivot handle material to use in a future design update.

First off, I’m no professional. I decided to do the work myself as I was quoted an outrageous amount for roughly 30 dents. Heck, I don’t even see 30, so out of the 9 highly visual ones. I decided I would do the work. Temp-do not do this directly in the sun (90*+), the glue will not cure/harden. I was able to work in the garage (while 97* outside) or under trees in the morning. After using the clear glue sticks for awhile, I decided to use the black sticks on both the blue and black pads. While the black glue works better with the black pads, I occasionally used it on the blue pads to do the process faster. Some dents only took one pull of the yellow tool, while others took 4-5 pulls. This takes patience, my wife helped with spraying alcohol on the glue and scraping after I pulled the yellow tool. Which also helped a bunch. I took a moment to watch a few videos on YouTube prior to doing the work.

I was very skeptical of the product but after reading the reviews I decided to try it. It worked! I had a dent on my the top of the front drivers side wheel well area and this device did the trick! Its not super perfect as I haven't taken the time to use the hammer and tools it came with. However the main dent is out and it is practically unnoticeable. Must buy!

Works exactly for my unusual need. I was looking for something I could take a grain imprint of the texture of a leather or vinyl surface. I wanted something quick and cheap to do repairs and these suit perfectly. I spray the surface with a lubricant like an auto interior protector on the surface I want to duplicate, put a small patch of the hot glue stick on, let cool and then use an IPA to remove the glue. I can then use that for cosmetic repairs when fixing vinyl damage.

Price is excessive for what you get.

Black ones are stronger

سيء