Can I adjust the mic gain by using this audio mixer?

Sure! The audio mixer comes with mic volume fader. You can push the fader gradually from the zero until desired loudness depending on your mic gain.

When do I need to turn on the 48V phantom power?

The mixer offers 48V phantom power for XLR condenser mic. Check the mic's specs. Press "48V" button to turn on (in white light) if needed. Turn it off if not needed to avoid damage or noise. Phantom power does not enhance mic volume.

Can I use the audio mixer with a condenser mic or dynamic mic?

Yes, the audio interface has XLR input for condenser mic or dynamic mic (but not compatible for USB mic). Remember to switch to "Dynamic" or "Condenser" according to the element of your mic by using the switch beside the XLR input to minimize noise.

What headphones can I use with this audio mixer?

It is suggested to use 3.5mm wired headphones (TRS or TRRS) whose impedance is 32 or 64 ohms. Like Fifine H8 (ASIN: B0B6BPVS3Z). Please note that the MIC MONITOR button is turned on and HEADPHONE channel volume not to zero during monitoring.

Can I listen to my voice while recording on a Windows computer?

Yes. Just make sure that the mixer is set as the output and input device of the computer, then check the box "Listen to this device" from the sound setting, and turn on the MIC MONITOR button on the mixer. (MIC MONITOR button in white means on)

Item model number	SC3
Connector	3.5mm。, USB。
Material Type	ブラック
Power Source	電源用USB-C
Voltage	48 Volts

Detalles

Descripción

Presupuesto

¿Tienes una pregunta? Mira lo que otros preguntaron

Preguntas comunes