Dumble RV Window Shade Cover for Camper Door - 16x24 Inch Thin Shade RV Door Window Motorhome Accessories - Foil Insulation Reflective Window Cover

I've tried several homemade things to try to block the light that comes in our RV door, which is right by the bed. Decided to give this covering a try. It's the right size for my Jayco travel trailer door. I put the Velcro squares on as per the directions. I didn't attached it for 3 days (the directions say 24 hours). The second time I took the cover off one of the Velcro squares came off the silver cover and stayed on the door. Others have mentioned that they had the same problem. I'm going to put super glue on it to see if it will adhere to the silver material. It did a great job of keeping the light out, and I'd give it 5 stars for that, but the Velcro needed to have a different adhesive to stick to the silver material.

I purchased 4 of these for my RV. 2 for the doors and 2 for the sky lights. They work well at keeping the heat out.

It was what I was looking for, the 24in was perfect but for the skylight 16in just fits wish it had been a tad wider, for door it would probably be perfect.

This was purchased to place between a small wine refrigerator and the vinyl floor to keep the heat from discoloring it. While I could have used just a small piece of insulation, this was the the right size and the edges had a seam, so made for a cleaner look. Thus far, it has worked as planned.

The cover was purchased to cover the skylight in the 5th wheel. The velcro tape supplied with the product will not stay attached. Its pretty lame that they supply 8 little pieces and the sticky side of the tape will not hold up the skylight cover. Initially I spent a little time and made sure it was lined up perfectly. About 2 hours later the cover had fallen down and none of the tape stayed on the trim ring around the skylight. I bought and added some velcro brand tape and the cover has stayed in place. C’mon people cutting corners isn’t going to get me to buy this product ever again.

Haven't had a chance to put it up and try it just yet but it's simple and straight forward so I expect it will work fine. If one is wondering, I will say it seems sturdy and not chintzy and should hold up for plenty of use vs cost.

I guess it works, i don't have another product to compare it to. My only complaint is i had to add velcro to keep it attached, the stuff that comes with it just comes off.

This is being used to cover the skylight in our RV. The accompanying velcro adhesive pieces to hold its edges to the skylight opening are pathetic. First of all, there aren't enough to affix it properly. Second, if you were successful with getting the adhesive to stick, the first time you attempted to remove it via the velcro, the inept adhesive would pull off of either the cover or the skylight. That said, I never got that far. It simply didn't stick to a thoroughly clean and dry surface. I have had to remove the adhesive pieces and purchase them separately to get a better quality adhesive product. The panel itself will and does block the heat and light from the sun. So it does work... just be prepared to do something extra to make it work! The fact that I had to remove and replace the velcro pieces, made the cost far more expensive than it should have been.