SKFFront Wheel Bearing and Hub Assembly with ABS Sensor Wire Sealed Spindle 8 Lug BR930502 Aftermarket Part Compatible with Dodge 2003-2005

Not cheap mediocre quality like many of the Chinese items. Will last like oem.

Look and fit just like factory. Way cheaper than from the dealership. Installed super easy and came with a new ABS cable. Installed these on a 2005 dodge 3500 Cummins. Drives so much better.

So the quality of the bearings seem pretty good so far, my only gripe is the wire to the ABS sensor was cut.Like the wire was cut with a box knife or something.No big. Just spliced it back together. But definitely expected better.Also, these don't come with new bolts.Again, no big deal. Just used the old ones. But prior hub assemblies have all come with new bolts.

Exactly like OEM part. Fit my 2003 Ram CTD 4X4 perfectly. Includes the ABS sensor and harness. To replace the hub, you will need a 1 11/16 or 44 mm socket to remove the axle nut. The brake caliper and bracket come off. To remove the hub, back off the 4 bolts that secure the hub and leave them maybe 1/3" out. Then use your socket and a short extension on one bolt. Start the truck and turn the steering wheel so the socket/extension contacts the axle housing or frame (depending on the bolt you are pressing). The pressure from turning the wheel should separate the hub from the housing, allowing removal. Much easier than endless hammering. The connector at the end of the ABS harness is removed by sliding the red "bar" to the top of the connector and then pressing with your thumb the exposed part while pulling the harness out.

Very nice quality part. I hope I don't have to buy these again, but if I ever do, this will be the brand. I did a lot of research prior to purchasing these. Most of that research pointed to this particular brand being the same as what came on the truck from the factory. I am not making that claim personally, however, the quality was very nice and they installed/fit beautifully on the truck so I wouldn't be surprised if it was true.

Fits perfect. ABS sensor included

This was the OEM part for front bearing replacement. Perfect fit o issues with installation.

Really good price, compare to the Mopar brand. Good quality also

Can't go wrong with SKF bearings. Everything was spec'd correctly and fit perfectly.

Got these for my 03 3500 Ram, they fit well. The plugs fit together good, there's no marks on the cords. The ABS light stayed on after I installed these but when I drove it a few blocks the ABS light went out. We'll see how long these last compared to the OEM.

Looks like a good quality part. Time will tell.

Good

Sigh!! After a lot of research, and confirming that these particular Wheel Hubs were worth the money, I am sad to report that they are junk! Both wheel bearing ABS wires were knicked and exposed wires, so I just used my old ones. No biggie....I installed them with ease and couldn't get the ABS code to clear indicating that I had no tone. Wires tested fine, so the tone ring must not be in the right place....after driving less than 3500 Kms, I felt some vibration in the front, but I figured it was because of my tires. I got home and checked to see if it was the bearings, and sure enough, to my surprise, it was!!! I'm at a loss......bought on June 22, 2023, installed on July 2nd, 2023, and failed by August 2nd. It's been over 30 days, and return policy will not allow me to circumvent. Very pissed off! Thanks for reading.....****Update**** SKF will accept the return after all. Just ordered another set. Should be here by Sept 14th. Let's see what happens.....