Package Include: 1* Receiver (with cover) 1* Remote Control (with battery, If you need extra remote control , please tell us. ) Item specifics Remote Distance:10-50M Operating voltage: AC85-AC260V (AC110V AC124V AC220V AC240V All is ok ) Switch Type:Remote Control Channel:1CH Max. Current:10A Frequency: 433MHz Encoding type:Learning Code Operating Temperature:-20'C~+60'C Shell size:98*39.5*23mm Output Mode: With voltage output Receiving sensitivity: more than 105 db Code type: learning code add transmitter by the learning button on the receiver board. Output State: Momentary Toggle Latched adjusted by dip-switch About control modes Momentary------------press the button is ON . loosen your finger is OFF Toggle---------------press one button for one time is ON .press the same button again is OFF Latched------------------press one button is ON , press another button is OFF . Setting different control modes: A: Toggle-----------Turn T1 of the dip switch to ON, L2 not to ON. B: Latched------------ Turn L2 of the dip switch to ON, T1 not to ON. C: Momentary------------- T1 and L2 not to ON, is Latched Learning and steps 1. Press the learn button of the receiver until the LED indicator lights, the receiver now remains in the LEARNING state. 2. You can press the learn button and the LEARNING LED indicator will turn off automatically, release the button, then press any button on the remote control. If the LED flashes 5 times, it means that the learning is successful. Note: This controller can learn remote control of fixed code and learning code etc. 16 different code. Delete the learned code Press and hold the learn button of the receiver for 8 seconds until the LED indicator is from OFF to ON, it means that all stored codes have been successfully deleted.
Trustpilot
Hace 2 semanas
Hace 4 días
