Creader 3001 OBD2 Scanner-2025 Upgrade Ver. Engine Fault Code Reader,Support O2 Sensor,Lifetime Free Update,Scanner for All OBDII Protocol Cars Since 1996

Worked right out of the box. The codes are read from the OBD port and the reader even translates the the code. It is definitely plug and play. If you have any mechanical savvy and understanding you would find it easy to use. It is also updateable via the internet at the company's website. It has a multitude of functions, more than I currently need, and hopefully will ever need. Additionally it will reset the dreaded "Check engine light" and clear the fault codes.

i got this scanner because we been having issues with a semi after some worked done with the egr and dpf. the scanner is in whole honesty pretty impressive, its pretty compact and the case it comes in has some restraints that keeps it in place. its perfect to take it on the go. the screen is on the small side. i wished it was a little bigger, but you can still see everything okay. in my case, when i plugged it in it didn't auto detected the truck, but was able to access everything by looking for it manually. im able to see stored codes, and livedata. this came in handy when finding why the truck would feel sluggish. the mobile mechanic would charge me $300 just to go scan the truck using his laptop, run a regen and giving me a print out. this does the same and i get to keep it. it super easy to use and well worth the money. 10/10 would recommend to anyone.

I bought the Launch Creader 3001 as a backup diagnostic tool—something to have on hand just in case. Thankfully, I haven’t needed it yet, but I’m glad it’s there. It’s a compact, plug-and-play OBD2 scanner that powers directly from the vehicle port. I tested it briefly to confirm it boots and reads basic data, and it worked without any setup hassle. The display is small but readable, and the cable feels durable enough for occasional use. It supports full OBD2 functions like reading and clearing fault codes, I/M readiness checks, freeze frame data, and even Mode 6 and Mode 8 tests for onboard monitoring and EVAP systems. For a budget tool, that’s solid coverage. Bottom line: If you want a reliable, no-frills scanner to keep in your glove box, the Creader 3001 is a smart pick. It’s not something I use often, but it’s ready when I need it.

This is one of the handiest tools in my toolbox! Have used it on the family's Honda S2000, BMW, Scion FRS, Kia Soul, Jeep, Ford Maverick and VW Taos to diagnose small issues. Packaged nicely and the handheld unit is easy to use. Display and menus are intuitive and results are clear. Displays error codes and allows clearing of codes.

Works surprisingly well

We got this Heavy Duty CPR 129 Elite ... It looks and feels well built. We like the fact that Launch offers LIFETIME tech. Support for the lifetime of the tool! I am very impressed with how fast it reads codes and operates very smoothly through the menus and resets! We also use this on our cars and light trucks as it is OBD2 capable!! We are very Happy with our purchase!!!!

First off a bit about myself because a lot of reviews are not accurate because of the lack of knowledge. I have been a mechanic for over 30 years and have owned two diesel equipment repair businesses. Make no mistake. This is Launch of China, they are the same manufacturer that makes Launch Tech USA, but Launch Tech USA has their own software. First of all the box showed up water, damaged, and upon opening everything was extremely dirty, but it didn’t look used. Some of the components were damaged during shipping, but were in usable condition. After opening the box I noticed that the tablet was a 2020 year model, not a 2023 like the ad claimed! An account was made, the unit was charged and fully updated, and then plugged into an International Maxxforce. The unit would not connect to three different International trucks we tried and in said on the screen that “no International software was found“. The scan tool was then plugged into two different Dodge trucks, none of which preformed automatic connections, and the Vin number was entered manually. One of the trucks, the scan tool would not clear a code that my Snap-on Solus had no issue clearing. After contacting Launch of China to make them aware of the issues, they told me the unit needed to be updated. Again I performed all updates available, none of which pertained to any major heavy duty truck manufacturer or auto manufacturer for that matter. Again the unit was plugged into an International truck with the same results. After this, I looked into exactly what software was included on the scan tool, and there was absolutely no software for any major manufacturer like John Deere, caterpillar, Volvo, Hitachi, Cummins, Detroit, International , etc. NONE!!! Emailed the company twice with pictures and information to which they have not replied. A little extra kick to the teeth, in the ad it said that a free gift of a Creader 3001 and a borescope would be included free of charge and all you have to do is “add them to your cart and they would automatically include them free“. Never received the borescope, and they charged me for the Creader 3001! Thank God, Amazon was gracious enough to push a return through, even though it was past the 30 day return policy. Launch of China is not to be trusted and I will never purchase any of their products again.

Worked great on my 2007 Volvo 780. Was able to code new injectors.😃

Ajuda bastante pois tenho alguns veículos na família. Valeu a pena

Good unit for starters in trouble shooting

Muy bueno, ayuda a conocer tu auto, y prevenir reparaciones costosas

Bought this 3 years ago so that we could scan our fleet vehicles in house and save on the cost of sending it to a mechanic. Works excellent with all vehicles I have used it on. Very easy to use. I bought one for myself at home

Easy to use