Swindon Composite Supplies : EPOXY Resin - For Repairs, Laminating, Carbon Fibre Projects - Kits Available : 150g,375g,750g & 1.5Kg Kits (Epoxy Repair 150g)

I've bought numerous epoxy resins from various suppliers in the last year and I have to say that this is the best resin I have used BY FAR.The others that I have wasted my money on either set too quickly, don't set at all, STINK to high heaven or gloop because you're adding powder to it for art project (Like I do).This resin is perfect, and the easiest and most flawless I've ever used.I have a 3D printer and a lot of the projects I print for my son he likes to have them glow in the dark.As a result I use resin and mix it with glow powder so the prints don't break if he drops them.Other resins I have bought I've had to throw the prints away after trying to mix them with powder as they either set and are tacky or they absolutely wreak of chemicals.......This resin is perfect and I can't recommend it enough.No Odour (AT ALL)Crystal clear (unless you mix it with colour powder)Great working time (mixes in 2 minutes, sets in about 8 hours with no tackiness)One to One ratio of mix (others I have bough you have to be a mathematic genius to figure out ratios)I'll definitely be buying more once this runs out.

My first time trying resin so it was great that there is opportunity to try the tester kit. I use it to cast pressed flowers in concrete. The instructions were thorough and the product was very easy to use. I tried to mix the resin for about 2-3 minutes. And when pouring, there were lots of bubbles. But then I used a heat gun and 95% of the bubbles were eliminated. The remaining bubbles could be manipulated from the bottom of the cast to the top of the surface by using a toothpick and then run the heat gun on the surface again. I was amazed how well the resin turned out. It was so clear with a gloss finish. No odour (which was fantastic as I have a toddler and baby in the house) and cured without feeling tacky. No shrinkage either. Would definitely buy again.

I used it to repair the bottom of a pottery storage jar. The jar wasn't special apart from being in a matched set so we decided it was worth doing. Taped greaseproof paper over the base and poured some of the mixed resin in. Gave it a couple of days to set and now the jar has a strong base that should last.What I don't like is that ALL casting resin cost more than I would like to pay. It is a good thing, but it's difficult to find uses that justify the cost. I would use a lot more if it was as cheap as white PVA glue!If you do need a clear resin that doesn't stink - this is the stuff, but don't forget it can only be as good as your preparation, mixing and patience allow.

Easy to use and flats and polishes nice. Very happy on carbon fibre repair on my motorbike hugger 👍👍

Really love this product, easy to use and great application. But it arrived with leakage as one of the lids was not closed enough. Very sticky stuff and I lost some of part A because of leakage.

I love this resin, I have bought it several times, it has never let me down. I have a YouTube channel and this is my go to resin because it is so versitile, it copes well with fairly deep pours and it doesn't have a strong smell to it. It also degasses really well and barely leaves any bubbles, in fact it is bubble free if you are a little bit more carefull than me when mixing lol. It sets fast and sets really hard. I absolutely love it. My channel is called Maries Stuff. Check it out to see some of the items I make with it.

I can not believe how easy it was to use, especially in the 1.1 ratio mixes. Value for money! It is crystal clear!! I made a stain glass panel with a photo frame insert and there is no visible line of where my panel glass begins and the epoxy starts its that good. Recommended highly to my art group and one of my friends has put an order in. Its strength of bond is excellent as i has jagged thick heavy pieces to hold on to the glass panel. It was reasonably quick setting.

Absolutely excellent epoxy resin for casting. I am using it for jewellery making and it is quick curing (actually non-tacky and removable from moulds in 12 hours or less, hardens to end state in about 24 hours), bubbles are easy to remove with a lighter, no odour.I have achieved a completely crystal clear, glassy finish when doming jesmonite also.Do not be fooled by thinking the product is lesser quality for the price, I have bought some resins from a well known company and was really unimpressed by the gummy results.About to put in a larger order! Great to support a local-ish business to me!