AMVRFace Cover Pad Facial Interface Compatible with Meta/Oculus Quest 3 Accessories, with Soft PU Face Cushion Pad Replacement for Quest 3 and Breathable Ice Silk Cotton

Fits well, easy to install and feels very comfy. Glad I made the upgrade as it feels like I have a wider field of view and see less if the middle part of the headset when wearing it.

Much more comfortable than the stock face pad, no doubt. Only a few minor issues.The rubber nose cover comes out too easily. It can be annoying sometimes but not that bad as long as you’re aware of it.The pad that actually touches your face is attached by Velcro. Now this isn’t necessarily bad, but if the alignment isn’t perfect you can run into some issues. You can get some light bleed around the top if it isn’t positioned right. And also the bottom bit can scratch your nose if you don’t fit them exactly right.The last issue is the height adjustment. It’s just so much more complicated and awkward than the stock one.Other than those few small issues, it is BY FAR more comfortable than the stock face pad. The issues raised are only really 1 time issues.

I really ever do reviews but this deserves. What an upgrade to the original design the original one or default one was so uncomfortable I thought about sending it back but with this it makes it so much more enjoyable . I am using be your best which requires to scan like you in an actual match and look around very quickly which made my nose hurt with the default design. With this is cushions your nose so much better only a slight mark when using it which is expected. Also does well to fill the gap on the other reviews there was a way to make it even better with some tape or something. Great product and great design. Price is worth it 5 stars

Fantastic quality, this is what Quest 3 should come with as default. The difference between this and the shoddy original (springs for distance broke after 2 uses) is night and day. Highly recommended. After sale support is also spectacular, replied within 2 hours of me sending them an email.

You have a Halo head band.Default for Quest 3 is terrible.Besides the amazing headset itself, the face cover, head-band and batteries for Quest 3 are just not great... let us be honest they are not even good.So it is likely you will want to replace these weak parts with improvements.For Face covers there is very little wrong with this set, it is amoung the best.There are two types of covers, nand ose guard which is a tad annoying but the black out is awesome and the feel is great. Makes the standard headband much more tolerable.A bit of light bleeds from top but a thin black electric tape 100% fixes this if want, the reason this light is there is due to air vents, so great if can ignore the tiny tiny light showing.So where is the "unless" come into play if the Xover is so great?This is because the Forehead portion is much bigger than default Q3 Face cover. I tfeels so much more padded due to this increased size, and it is a most for this face cover but it is because it is bigger that it does not fit some halo style headbands.I did not know this size difference, so I feel I should warn others, make sure you check you current head band can support this face cover. The Face cover is made for Q3, but does not take Halo Head Bands into consideration.Now I have to decide the best Face Gaurd or the best Head band....

A difficult review to write....Please see my enclosed photos.A three start review does not mean the product is not good. In this case it is adequate, but there is room for improvements.Opening the box, I was a little surprised at how fragile this face cover felt compared to the std one that comes with the Quest 3. But, the std one does not adjust as this one does to allow for a greater distance between your face and the lenses. And that aspect of the face pad has problems that I'll come back to later.The removal of the original face pad is easy enough, slight pressure to squeeze it as you gently pull to remove the clips from the base unit and it pops off.We decided to use the PU leather type covering, having later trying the fabric one with less success. The leather type covering seems to mould better to the face, my wife having a small head and mine being much larger. That means zero light leakage at the expense of it getting a little sweaty with prolonged use. It is easy to wipe, tho.The fabric one feels more comfortable, but it does not seal as effectively, it could do with being thicker. Also, we found we would be less likely to feel hot or sweat with the fabric design, it just leaked light tho.I do like that it is velcro that is used to fit the different material based pads, perhaps there could be others that would fit..?The nose piece, something the std face pad does not have, is "OK". Fitting it as described is easy enough, but when wearing you can still detect a slight amount of leakage around its sides. A small piece of black insulation tape each side resolved this. I'm not sure how this could be improved, we all have differing sizes of faces. But it can be resolved.Fitting of the face pad to the Quest 3 has to be done with extreme care. When the face pad arrives, it is set to "medium", as in the depth between the pad and the lenses. By doing that any pressure that you apply to press the face pad into the locking latches, there are four, will but a lot of pressure on these rather slim and weak latches on the face pad - see photos of the damaged one from our first face pad.We took extreme care when fitting, but they can so easily be damaged, this really needs to be addressed as it is a feature where users can change the setting of these, for those who wear glasses and those who do not.It is flimsy at best.Even tho I have been somewhat critical of the design and how it is implemented, we were still happy enough to order a replacement. That fitted perfectly fine, same amount of light pressure, and all was well. However, I would not wish to need to continue to change the setting of those latches.The minimal light bleed around the nose area is easy to reduce and impossible to do so with the std face pad.I have included a photo showing this face pad fitted with the KKCOBVR Q3 PRO Battery Head Strap, as that is a popular model to use. It fits with zero issues and combines wonderfully with that strap.Even with caution and understanding of its limitations I do not recommend this face pad, extended use has shown it provides less facial pressure and less associated pain and discomfort, but the head strap plays a part there. But the fragility of making adjustments for the depth control, and difficulty doing it, is not encouraging.In the end we refunded the replacement unit.I hope this review helps you.