Siwdoy279973 & 3392519 & 8577274 Duet Dryer Thermal Cut Off Kit with Thermistor & Thermal Fuse Compatible with Whirlpool

Worked great, came fast, good price

This kit gives is great. once you have your dryer opened up it's best to just replace all of these parts at the same time. All you need is a 1/4 nut driver or socket. Make sure to take a picture of the wiring. Also make sure to unplug the unit from the wall before you get into these parts. First check the heating element. Top and bottom connections to element are easy to get to and you should check them for continuity. If it's bad you replace it along with these parts. There is a kit that also includes these parts and the element. Save big and impress yourself and friends. Make sure to check for the possible causes of overheating such as clogged or kinked lint vent. Also before you do anything take a picture of the how the wires are routed on the element components. They can be confusing but labeling red and black on top and bottom really helps. If you test for continuity from the red of the thermal cut off to the red with white w of the element and it's open (no signal) then one or more of the components are bad. Replace them all.

Maytag dryer

Instead of spending a lot of money having a repair guy visit, or having to shell out cash for a new dryer, I was able to fix my dryer for a minimal cost and easy installation--done in under twenty minutes!

DRYERWhirlpool Duet GEW9250P(color code)PROBLEMPushing the dryer "On" button brought up the indicator lights, then pushing "Start" button wouldn't start the dryer. Possible causes: clogged/dirty dryer vent run; sticking thermostat; failing thermister, etc.FIXI'd recommend replacing all 4 sensors/devices in this kit AND cleaning your dryer vent.These aren't Whirlpool OEM parts (listed below), but I'm confident will work fine ...3392519 Thermal Fuse3976615 Thermister3391914 Thermostat 295 F8318314 Thermal Cut-OffSome online videos on Youtube suggest you need to tear apart the whole dryer - not true!You can access all parts in this kit by removing the bottom front panel, then the blower motor cover; reminder to UNPLUG the dryer before performing repairs (for safety).Tools: 1/4" Drive SAE socket set (1/4" socket, specifically); flashlight and needle nose pliers (helpful disengaging wire connectors)

The thermal fuse failed within a few weeks of use.

The shipper was fast and respponsive adn I had my parts when promised. The parts went right in as well as expected since if you dont have acces to the rear of the machine to release some parts can complicate things slightly but a bit of patience and small tools get all of the sensors swapped inside of an hour and reasssembled. Remember it taked a few minutes of the dryer running before the heat kicks in. Once you know it works, close the front up.

Parts fit properly, are functioning properly. Price was considerably better than other sources.