Workbench Pegboard Accessory Kit, 50-Piece (WB050A)

I was looking to upgrade my 3D printing setup and stumbled across this. I saw another person rate it 5 starts who also utilized it for their 3D printer, so pulled the trigger. Pros: It's sturdy, even for the style of 3D printer I have which results in a lot of rocking. There's still some movement from the printer, but to me it's negligible. I also triple checked the screen tightness and made sure everything was level at the final stages. I love the amount of space on the upper table top and the lower shelf. Capable of fitting my printer, filament dryer and still have some workspace. The pegboard seems nice and sturdy, although I haven't really loaded it up with stuff yet. Cons: The assembly was cumbersome. Prepare to set aside at least a 4 hours to assemble this if you're doing it alone. It's one of those "don't fully tighten any screws until the end" assemblies. There are about 100 screws total, most of which you'll have to tighten twice by the end. The upper shelf/light rack didn't get installed because one of the holes on the upper board didn't line up with the holes on the frame. Not a huge deal in my case because my printer accessories run higher than the shelf, so I likely wouldn't have used it anyways. One of the drawers doesn't stay fully closed. I'm not entirely sure if it's something I did during assembly, or if the flanges aren't perfect 90s, so it isn't sitting level on the rollers. It's minor enough, so I don't mind that much. A corner of the pegboard was chipped near the screw hole, but there was still enough surface area for the washer to mostly seat on the surface. Overall, for a workbench less than $200, I'll still give it 5 stars. If you're patient and somewhat handy, it's worth it. It's only been 2 weeks, so if anything changes, I'll make an update.

Other than some me problems (putting a part on upside down, realizing its upside down, taking it off, reinstalling it, realizing i installed it on the wrong side, rinse and repeat) it was great. When everything is installed and mounted properly it is very sturdy and functions perfectly. Im using it for my 3d printed projects and the pegboard is super helpful for mounting my tools to while the light is bright and perfect for seeing small details. My only real issue is I personally didnt like was the way the instructions and parts list was done. It was worded well for the most part but all of the screws in the diagrams looked the same so you had to read each instruction to figure out what screw to use instead of looking at the picture and knowing "ah, this screw type here". Overall tho I still give it 5 stars because it came out great and im happy with it.

I needed to replace the aging computer workbenches in my garage, and these were not only inexpensive but nice looking. They arrived quickly, and I had the first one together in about 90 minutes. The second one took me less than an hour. They look fantastic side-by-side, are sturdy enough for what I use them for (3D printing and computer work), and fit the space nicely. They don't wobble at all once all the bolts are tightened down, and that's important for the 3D printer. They really are great workbenches. So why only 4 stars? Because the lights that come with them are cheap, harsh florescent lights. Yes, you read that right. Here in 2026 there are still companies shipping ugly florescent lights. I swapped them out for some cheap LED strips that look fantastic and don't make me sad.

Very nice workbench! Everything went together fine and isn't super complicated you just have to make sure you follow the instructions on which bolts to use for which peices to a T. Very happy with mine and 100% worth 150 bucks. It's definitely a process putting together but if you have a screw gun it won't take near as long. If you don't have one then good luck lol

TLDR: Well worth the money if you can deal with a massive headache of first time setup. Im a hobbiest, so im no architect but I do woodworking, some machining and 3d printing... this was the most frustrating first time setup I've had to date. Criticism: Firstly, the instructions are scribbles of unspecified parts and pictures with poor angles, so you have to guess on most parts. (Not easy guesses like most desks/workbenches) Second, every single screw is a screw, washer, and nut which means its very sturdy... but also ouch my fingers hurt 2 hours in and we're dying 5 hrs in... Third, I saw in many other reviews, as it also happened in mine, do not expect to get ha does for your drawers. (They do not come with handles...) Build quality: Very sturdy, no lanky welded parts or cheap feeling mdf. (its very nicely finished) It feels unsteady IF you do not tighten screws, which is likely the case of other reviewers. Tighten your bolts.... it feels very heavy duty once all bolts are tightened and the workbench is level. Overall thoughts: Excellent build quality: (9.1/10) Ease of setup: (0.5/10) Build aesthetic: (8.5/10) Light quality: (8/10) Overall rating: (6.1/10) Huge knock in Overall rating because there were Missing parts (handles) and there is no way im taking it apart to return because itd take another 4 hrs to do so...

Very nice, easy to put together, not sure why others thought it was a crazy puzzle but it went together nicely( hand tighten only until you get bottom shelf installed to square it up) Also it came with exact hardware no extra bolts or screws, light is cheap ( easy fix) other than that it’s nice it’s solid, good buy.

This company didn’t provide enough screws to finish putting the work bench together. This is also not a very sturdy table.