ERA 1830-31 40mm High Security BS Nightlatch - Brass Effect Body, Gold

This lock is extremely sturdy, but fiddly to install. I had to purchase a seperate 32mm drill bit for the main hole in the door (you need other drill bits as well). The main bracket that sites between the front and rear sections of the door needs to be cut between 6 and 7 mm long - this is very fiddly. Fortunately I had bolt cutters and a metal file, so I was able to get the length exactly correct, but it took some time.It was also very fiddly to fit the internal lock mechanism to align with the bracket. I ended up stuffing the hole with some kitchen roll to have the bracket sit at the correct height and angle.This model has the dual locking function, so you can lock the door on the way out and if someone smashes a sidelight window they cannot unlock the door... Very high security.It came with 3 keys.I asked on the Screwfix site (UK), what oil should be used to lubricate the lock and they recommended 3 in 1 oil.The lock closes with an awful thud, I wonder could ERA not improve this to be less of a racket. The lock has a "hold open" function using a small black button on the lock body.I had a laptop stolen years ago as someone was able to use a credit card on my lock - you cannot do that with this lock. The lock is fantastic value for money.

A very good lock and it’s appearance will put opportunistic thieves off and professionals won’t even try because they know it is drill proof, but if you have limited tools and skills it may not be for you, the tolerances are only +- a couple or so mm, you have to cut the actuating tongue to just the right length and it is then very fiddly to get the tongue into the lock body and positioning the holes for the cylinder have to be spot on in order to get the backplate correctly positioned, if you do it yourself only put one securing screw in the backplate until you are sure you can mount the lock body and when you cut the actuating tongue do it by gripping it with a set of grips and then cut it with a mini hacksaw up against the grip jaws.You might want to fix the hasp with 12g screws to make it more resistant to being jemmy forced

Easy to fit and it works flawlessly and lasts well

Very robust lock, fitting instructions could be improved by larger print,very satisfied. Value for money.

Felt obliged to write a review given all the mixed reviews on here. I can only assume that the bad reviews were due to people trying to install this product themselves. I had a reputable local locksmith come out to install it professionally and he commented on how good this lock is and how it should be installed by a professional. Installation cost more than the lock, but the lock is pretty well priced.The product looks great, is very sturdy and I’ve had no issues whatsoever. The door feels far more secure now. I would highly recommend it.

Had to buy whole lock for just the front pull

Makes my old door with new brass fittings look like a new door.

Really sturdy lock and operates and does the job well. If you are replacing an old unit of same make then just check the size as the 60mm and 40mm look very similar in the photos.