SpeTool1/4" Shank Point Cutting Roundover Router Bit with 1/2" Cutting Diameter 1/4" Radius, Carbide 2 Flute Tipped Round Over Beading Bits for CNC Router Woodworking Carving Tool

Very good router bit.

This is a high quality bit that leaves a smooth finish. The cutting is centered, which allows the use of a bit setter to run your round over. Great bit.

This appears to be a good quality roundover bit. When I saw it on Amazon, I figured that I will give it a try for some custom beadboard. My wife isn't thrilled about the narrow width of the stock beadboard pattern and with this, it will be easy enough to write a program for anything she wants and have it processed through the mill at work. 3/8" MDF is cheap enough and should do the trick. I'll report back on how this does for longevity once I have some material run. Until then, it comes with a good quality case that will keep it protected. I think it's a OK value overall, it seems to be a bit closer in quality to name brand cutters.

This is a good-quality bit. I am a fan of SPETool bits. They have been working very well with my CNC setup and keep delivering good-quality cuts. They always come in a nice container and are clearly labeled so you can be sure you are grabbing the correct bit. **SPE Tool Pro-tip**... The labels are usually applied partially over the cap and square tube. Your first instinct might be to cut it with a razor blade. BUT, these labels are made on a nice material that you can easily peel up, and re-locate on the tube. Sounds silly, but this is FANTASTIC for keeping your bits organized.This bit provides a round-over cut. The routes were a little more involved to get exactly right, but once I did, the edges were great. This worked exactly as you would expect a round-over bit to work. The project I was working on was on a pine plank and the cut quality was great.As I was testing the setup, I also used the bit to make a pass through some MDF, and also worked great.I've only used this bit twice now, but I can say that my other SPE bits continue to provide good cuts after MANY uses.I am very happy with this bit.

Great bit if you want a V bit for cutting letters and script type shapes. Clean, sharp cutting edge.I used a 6.5 collet.