CRC (SL3190-10PK) Sta-Plex Extreme Pressur

The thing with grease is, over time, the heat from a high RPM device, can cause the grease to break down. Eventually it will dry up into a cake like substance, and once it has done that, it no longer lubricates. Your goal when putting in new grease, is to pump out the old grease. Grease guns do this with the pressure from the pump, and different grease guns, will operate under different PSI ranges. (Pressure Per Square Inch) I recently purchased a Lincoln Industrial air powered grease gun. When I did, I also bought a couple of these grease cartridges. When they are stalked full with them, they only cost $6.00 dollars a piece. When it comes to greasing bearings, mandrels, cv-joints, you want the best grease you can buy. These operate under high pressure or high temperature, and simple all purpose grease, will not cut it. INSTALLING GREASE CARTRIDGES: When installing a grease cartridge, one end has a cap which you just remove, while the other end has a sardine can pull off lid. First, remove the pump head from the grease cylinder. Second, pull the grease loader (Also called follower) all the way back and then lock it into place. The side which has the simple pull off cap, that end goes into the grease cylinder. Then you pull off the sardine like lid, and then screw down the pump head onto the grease cylinder. Then you release the grease loader. CONCLUSION: I have used this type of grease many of times by different brands and never had a problem with it. And so far, I am having no problems with this brand either. Lithium based, is the best grease you can buy. It gets the job done, and saves you money in the long run. Highly recommended!

I like this one. My wheels seem to get a good high mashup of a variety of greases. But always a high quality lithium complex grease. Everything got this good sta-plex this time, other good greases in random rotation is lucas marine lithium, and valvoline lithium wheel bearing grease black grey. This one is thinner yet sticky and has an average high drop point. All three of these greases are great and top shelf and interchangeable. Just be careful to always use either lithium or either moly, never both and never mix them. I use this sta plex on everything from wheel bearings to u joints to steering knuckles, really good grease.

Good quality, items arrived on time as expected.

Very pleased. Really sticky. Has performed excellently.

I had seen this product used on a YouTube video and needed to re-grease the wiffle-rod on my Coleman lift system. It was also recommended to apply a thin layer of the grease to the cables as well. Worked great. It is a little softer than I expected and tended to get stringy and sticky but I think that is just the nature. very easy to apply but I purchased the tube, and a tub might be better for people who only use a bit each time. The tube is designed to go in a gun (like caulk I suppose). I just opened it and scooped it out with my fingers (with gloves on).

Like this better than most

This is nice grease. Works good

Good for my AR-15 Bolt control group. Now I got a lifetime supply :) Seriously this is good for anything from bicycles to lathe centers. Get some.

This grease did a great job at lubricating our concrete mixers. The price was very reasonable and the quality is great.