Tornado 24 Inch Pro Series High-Velocity Oscillating Wall Fan – 3-Speed, 7600 CFM, 6.6 FT Cord – UL Safety Certified for Commercial & Industrial Use

This is a great piece of equipment. The fan is built like a tank, everything metal, and built solid. Some minor assembly was required but fit on everything was perfect and assembly easy. Mounting was similarly easy and solid because the design was actually thought through. Finally, this fan moves air, really moves air...a crazy amount of air even at the lowest setting. Turned all the way up my home gym takes an hurricane characteristics. The fan is not silent, but for the amount of air moved it is also not that loud. Overall, extremely pleased with this product great fan...if I need another fan it will be another Tornado 🌀.

I was looking to get the air moving in a hot garage while I'm working on my cars and this fan has proved to be perfect.Assembly and mounting was very straightforward and easy - had it ready to go in 15-20 minutes. I mounted it high near a 10 foot ceiling roughly centered on one wall of the garage. I love the oscillating function, it moves plenty of air even on the lowest setting. The lowest speed is roughly equivalent to the highest speed on a normal house box fan. The air can be felt 15-20 feet away.The pull chain length is perfect for me to reach but not by young children. Construction is good and operation is smooth and fairly quiet. So far it's well worth the money!

Overall, I like this fan. You have to put it together which takes a bit of time and then install. I am using this in my garage. If you put the blade on backwards, it will not push any air properly. I initially put in on backwards, there is not really a good way to tell which way it goes, so try to follow directions. The fan seems sturdy, has some plastic parts, but once installed all is good. Since this is a chain pull, I leave it on medium and use a smart plug to allow Alexa to turn it on and off - very convenient. The fan is noisy for sure, but in the garage with how much air it circulates, it is worth it. The three speeds are close in air flow. If I would change something on the operation, I would make low slower so you could have a quieter, lower flow option when needed. After a couple of months of use, I am happy with my set up and the entire garage gets air flow.

So this fan is truly a great product. I own a shop that uses fans to assist AC’s in keeping air flowing 24-7 and help keep the environment at a perfect range of temperature and humidity. This is a big powerful fan yet quiet and almost vibration free even on higher settings. I purchased a “like new” one at a third of the cost of a brand new one and couldn’t tell the difference. It outperforms all similar plastic, 16”18”20” fans I’ve had over the years. Mounting bracket is basic, black Steel, easy to mount but keeps fans about 10” off the wall unlike most other models that big the wall. Very good fan, I leave mine on lowest setting and it moves tons of air. Very happy I purchased this fan and will be changing all my fans over this model.

I wanted to like the fan but couldn’t. It moved air well and was not too noisy. But the cheap plastic bracket that is used to adjust the fan angle facing position is terrible. After mounting it on the wall we wanted to change the angle of the fan. After loosening it and pointing it down, you only have 3 fixed adjustment points. You can’t just pick an angle you want it to point. After adjusting it a couple times to find an angle that would work, the cheap plastic bracket wouldn’t stay tight enough to keep the weight of the fan from sliding down to its lowest angle. I couldn’t tighten it enough without breaking it. The bolt to tighten is a shoulder bolt seated in a soft plastic bracket. It just kept sliding down and blowing air towards the ground.

My garage is also my mancave. I have a bar out there some chairs TV etc... But it's a garage so it's hot humid etc. I had a few pedestal fans over the years out there to circulate the air so that the recliners don't get mildewy smelling etc from being in a garage. Someone suggested I get a wall fan an industrial style with three blades so I ordered this one. I used a Piece of birch to mount it where I needed it, since it was in between the wall studs. Now on day like today where it rainy, running it on low the air is circulating throughout entire garage where I mounted it. Being that it's an industrial fan it's louder than the pedestal fans I had. That is the only thing I can say about it. Also I didn't get a remote an this review asked me about that so I'm gonna look into seeing if I was supposed to get one. If not no big deal. But it works an moves so much more air that it's worth it. I may order another on for my soon to be enclosed deck.

The fan part runs fine, unfortunately, the adjustable neck is weak and would not hold position. You’ll see in the top bolt in the picture I had to install to get it to stay. The lower bolt is because it’s only designed to pivot from straight ahead. In other words, it has to mount in the middle of the wall. Since I needed it off to the side of the garage I had to modify the bracket and through bolt that part as well.

The media could not be loaded. The people who complained about the CFM MUST have installed the blade wrong. The blade needs to be installed with the set screw on the underside AND on the flat of the shaft. If you put the blade on with the set screw facing you (which is easier to tighten) you will have little to no flow. I didn't read the instructions so my label is not facing the right way but then again I ended up mounting mine upside down (on purpose) anyway. My only complaint is that the mount has horizontal holes for stability and for me on a block wall its great but if I were to mount this to a wall stud I would be drilling vertical holes in the center of the round mounting bracket. Well built old GE type knockoff that blows a ton of air even on low. Cost to run around the clock at .14 cents per KWH is about $10 a month.

Llevo años comprando ventiladores de plástico de buena calidad (según) pero tarde o temprano terminan por fallar ya que generalmente los prendo por mas de 10hrs continuas al día y, o el motor falla, o deja de aventar la misma cantidad de aire. Este ventilador en particular avienta muchísimo aire, mucho mas de lo que imaginé. Me sorprendió el precio pero valió cada centavo al ver que genuinamente sobrepasó las expectativas, tan es así que hasta termino tapado al dormir. Lo recomiendo bastante.

Increíble, mucho aire!

Considero que estoy pagando la importación para que me llegue a cancún. El material se ve reforzardo , tenia un poco de miedo después de haber hecho la compra. Ya que decían que era ruidoso. Pero para mi en lo personal esta bien. Lo compre para recamara. No viene con los taquetes pero no fue problema para mi.

Instrucciones de armado y montajes insuficientes. El motor es demasiado pesado, ya instalado, hace que el ventilador se incline hacia abajo; no se sostiene en otra posicion, la inclunacion no se puede regular. La velocidad baja es muy alta y la alta altisima. Buenos materiales; mal diseñado