Movo GB-U70T Underwater Diving Rig for GoPro Hero with Cold Shoe Mounts, Wrist Strap - Works with HERO6, HERO7, HERO8, HERO9, HERO10, HERO11, and Osmo Action Cam - Scuba GoPro Accessory (Tangerine)

The media could not be loaded. This thing is machined from a solid aluminum billet. Meaning it's one solid piece of aluminum with no seams or bolt together construction. It looks like it's been brushed or peened to a very nice matte finish. It has several 1/4" and 3/8" mounting holes all over it and two cold shoe mounts with stops.My only "complaint", and it's not MOVO's fault, is in mounting a GoPro with the Media Mod installed. (please note the Media Mod from GoPro is not waterproof). The GoPro screws you would normally use are just too big on the thumb end and cause your camera to tighten down all angled from the mount.However, if you want a solid, easy to get on-track handling system...simply buy a replacement screw for the GoPro mounting. A package of three Stainless Steel bolts plus nylon washers costs about $2.00 from any hardware store, M5-.80 x 20 is the bolt\thread size. See picture...You only need one of each, but like NASA it's nice to have a spare :)Hey bottom line...this thing is a tank and feels very nice in the hand. Buy it, you'll love it. I suspect without the Media Mod and your GoPro watertight...this would be a huge blessing for video control while diving. But that's another storyline.Seriously, this one is winner!I bought this mount myself, MOVO had zero to do with this review. It's just a good piece of equipment, well done.

This camera tray is amazing. I was very skeptical when I purchased it if I would like the style and size. I got the bigger version, and it is the perfect size. I installed a few stainless steel eyebolts into the 1/4-20 threaded holes to attach bolt snaps to, and this worked very well. I have a few dozen dives with this and I couldn’t be happier. It handles my GoPro with plenty of room for my hands, and I have locations to add lights in the future. It is extremely light, but very very solid. It’s made from 3 pieces of cast aluminum bolted together under the yellow handle guards, and this makes for a very solid and stable platform. Absolutely NO wobble or slop in the unit.The one issue I have found is only cosmetic. The yellow handles cover the bolt locations on the handles, and these locations are covered by small yellow tabs that simply serve to cover the holes. These tabs do not stay in place and I lost both tabs on my first dive. I don’t know why they included these tabs at all, but I don’t miss them and it doesn’t impede the function of the product at all in any way. It simply is cosmetic. I would give the product a 98% grade, rounded to a 10/10

Great small cage. I purchased for use of my GoPro Hero7, while diving. The reviews on this product really helped guide me in the direction I wanted to. So let's break this down for future buyers.We will start with the one big flaw. Size. It's a little to short IMO to use the shutter button with the supersuit equipped. It's also maybe a little to narrow to get a solid grip around the handle without pushing the camera around. As others within these reviews have done, I overcame these issues by adding and arm to the base of the camera. I will tell you though, I absolutely love the compact size while diving. It's not to large that it's over burdening or clumsy while diving. 1 inch taller, 2 inches wider I would have given 5 stars.Weight. Its heavy enough to where it feels like a very solid unit. Not so much it has thrown my buoyancy off. And obviously its negatively buoyant.I havent seen any signs of the rust thus far on the screw as mentioned in other reviews. I have completed 2 saltwater dives off a boat with it going straight into clea fresh water each time and a final soak and rinse when I got home.The finish is nice and all the edges are rounded. No issues with any of the threaded holes as of yet. The cold shoe receivers fit snug. And the lanyard holes are great. The lanyard that is comes with is poor quality, but I had no intention of using it when I made the purchase anyways.The GoPro tripod mount that it comes with does the job but its plastic, which i find odd when you are order an aluminum setup. I plan on replacing it with an aluminum which are a bit shorter and may remove the need for the arm. I'll update if it corrects the shortfalls.All in all, a great budget friendly diving cage. The guys at the dive shop were impressed.

This large version of this frame is part of my first attempt at a diving video rig. I added a couple of 1" ball ends from MINIFOCUS and some clamps from WLPREOE to hold a pair of Orcatorch D530V lights.The frame is solid, has a ton of attachment points, and is easy to hold and manipulate. The captive screw for connection to the GoPro housing mount is a nice feature, but like some other users I had a bit of an issue with the camera rotating if bumped. I'm going to add a couple of holes or a pin to help keep the mount facing straight forward. Overall I'm very happy with this unit and will continue to use it on future dive trips.For anyone looking to assemble a video setup on a budget, get higher power lights! The Orcatorch D530V is a nice light, solid, and appears to be well built, but it's just not bright enough for daytime shooting beyond two or three feet. Again, this is NOT a fault of the lights, I just chose poorly.

Inaccurate description. Doesnt fit a gopro hero 11 with underwater case.

Una cámara go pro nueve no cabe en la base de este producto

I liked this setup for my Gopro works very well I put 2 led lights on it so the pictures underwater come out great now.

justo por lo que cuesta, se lo vi a un cliente y decidi comprarlo.muy contento con el producto y muy util. me hubiera gustado mucho que viniera con el adaptador para la go pro. lo uso para buceo y planeo montarle microfono para contenido fuera del agua etc. es una herramienta interesante y sencilla

Very slick! Exactly what I was looking for as someone new to video making