Inside Pipe Cutter for PVC Pipe Cutter Tool with 4" Scale Adjustable Depth Gauge Guide, 5pcs Saw Tooth Blades with 0.315 Hex Key Shaft, Plumbing Internal Plastic Pipe Cutter Set

I'm a DIYer putting in a Slimline shower pan fixed in mortar on a concrete floor. Had to cut off the drainpipe after install and any screw up would be catastrophic. I got this product and the one with the aluminum head and spring-loaded blade to compare. After reading a detailed review of the aluminum head/spring loaded system I chose not use it due to possibility of plastic getting caught in the blade (if run at the wrong speed), jamming the head in the pipe. So I used this device which worked really well. The wide white puck on top allows you to slide it around the top of the pipe; you get a nice level cut (or at least as level as the top of the pipe). Several blade options for various pipe wall thicknesses. Allen wrenches included are of OK quality. I practiced on some pipe before using this and felt very comfortable doing what I had to do.

Easy to use. Worked perfectly to make accurate cuts in the 2" drainpipe for my new shower.

Good price! Quality product. Works well as described. This is a great tool to have in your collection for the Pro or DYI person.

Must have for a tub installer... Easy drain leveling from the top side.. consistent cutting... Overall a good tool..

Good quality and comfortable to work with

was so excited for this to work, I must have done it wrong lost the pieces down the pipe I was trying to cut,

Worked great! Took 20 minutes to cut the pipe, put in a new flange and bilts down the toilet. We replaced our floors and found the builder had rigged the floor with an extra 3/4" of subflooring in the bathroom. This meant the flange was too high and the toilet would wobble. I tried using a metal cutting angle grinder and burned up 3 blades and an hour of time before I tried a hacksaw... which was useless... I found this and ordered it. The pipe was cut perfectly flush in under 10 minutes and the whole job was done in 20. I cranked down the hex nuts as tight as possible because I was afraid of the guide slipping but it never did. It did take a few tries before I realized not to move the drill in circles but to more press in one spot from the inside until the blade pushed through that section of pipe and slowly work my way around in a clockwise direction until I had cut through the whole 4 inch pipe. One thing to NOTE: make sure the label side of the blade is facing up so the arrow matches the forward direction of your drill!

Works very well but I wish I would have gotten the clear plastic one!

This product is amazing

Works but I don’t know if the guide is of easy to use but I suppose it is better than no guide to avoid error

Worked very well on 3 inch abs. HEADS UP. For extra support while cutting a regular skill saw blade fit over the bearing Like it was made for it.

Just what i needed.

My husband is happy with this tool, very handy to cut pipes.