ArmorPoxy Garage Epoxy Floor Kit – 100% Solids - 2 Part Industrial-Grade Coating w/UltraGlaze Topcoat | DIY Slip & Hot Tire Resistant |300 Sq Ft - Medium Gray - 17 pc kit

After binge-watching a ton of epoxy floor makeover videos, I decided it was time to give our garage a serious glow-up—and Armorpoxy seemed like the perfect choice for the job. We’re in the middle of a full garage remodel, and this floor was the foundation (literally) of the entire vibe. Between work and life, the project took a couple of weeks to complete, but the results were worth every bit of effort. I used two kits for my standard two-car garage, and that ended up being the sweet spot to get full coverage and the finish I wanted. The product itself was solid—good consistency, easy to apply if you follow the steps, and the final look? Sleek, clean, and seriously elevated. The space already feels brand new, and I can’t stop admiring the shine and texture. I’ll be back in a year to post a follow-up and see how it’s held up over time, but for now—this kit definitely delivered. If you’re on the fence about it, go for it. Great product, great results. Brand new floor, brand new vibes.

Our garage remodel turned out great. The instruction are clear and direct removing any guesswork. The kit came with almost everything we needed. Square footage is true to size quoted. We heavily covered 800 sq ft with a 900 sq ft kit and had a small amount of product remaining. It went down easily, looks professionally done at a fraction of the cost. I’m satisfied and glad we went with this option

This product was awesome, the 600 square foot kit was perfect for a 2 1/4 car garage. The kit had everything needed for the job and made the process so easy. I followed the instruction thoroughly step by step with the results being amazing. For a month now i have been parking on it and it has held up so far!

I like it when it's new, but hard to clean to original quality, I'd say. Plenty for a 3 car garage! The tires like to turn spots yellow and not easy to remove it.

I highly recommend buying double of what you actually need and doing a 2nd coat before putting the flake. I prepped my concrete (it was brand new so I know there were no previous contaminants), but there are several areas that visually are not to my liking. In the past I have done my garages with a different brand and have always done two or more coats. I read the reviews on this product and decided to try just one coat. I should have gone with my gut. Lucky for me the places that I have issues with I plan to put pallet racks over so you should not see it after I get might be longings moved into the garage. Prep and application we're both very easy, the kit comes with everything you need. And the epoxy was really easy to work with. I live in a very humid climate and the clear coat was applied 5 days ago, and is still a bit tacky. But it looks like it's going to be a nice four when everything is moved in. ***UPDATE*** I haven't even parked on the floor yet, I've only been walking and remodeling the room and it's already coming up. I did all the prep work and, it was new concrete so I know that's not the issue. But don't waste your money, buy the Rust-Oleum brand. I used it in my garage at my old house and it held up great for 6 years. I just wanted to try something new and I wish I hadn't. ***Another update*** Finally moved into my new house and the first time I blow my garage out with a leaf blower it peels up! DO NOT BUY THIS!!! STICK WITH RUST-OLEUM ITS BETTER

Easy job, good product

I used the ArmorPoxy Garage Floor Epoxy Kit for the garage in our Charleston home with excellent results. I had previously used an epoxy kit from one of the two big box stores on our garage in Houston and it was not successful. The etching did not work and the finish did not adhere consistently and flaked off in many places very soon after applying it. The ArmorPoxy kit contained everything I needed to try again with our 21'x24' garage in Charlestion included well written instructions with very helpful hints. The results were even better than I expected and the floor looks just as good as the one's friends of our have had professionally installed at 3- 4 times the cost. I have already placed a heavy refrigerator, storage cabinets, and vehicles on the finished floor without a single scratch or flake. So I am encouraged by its initial toughness and only time will tell if it will hold up over extended use. But, right now it looks great and I would highly recommend it for tjose that want a professional result with a DIY kit from ArmorPoxy.

UPDATE: Tires from motorcycles and cars will leave a black tire STAIN on the epoxy.. The product is great quality, i purchased the 600sqft kit and covered a 3 car garage with it. Really impressed with the way it came out. I will say the video tutorial was very helpful and i suggest re watch it a few times. Downside it although you are buying a “kit” you are missing the paint rollers and extension poles… the roller brush they provide is very short so when you go and buy a paint roller and extension pole i suggest you get a wider roller brush. The epoxy drys fast so id recommend a second person assist you.

Nice product… arrived early. Applied very easily and looks nice. One bit of advise is to use a degreaser on any oil or grease stains and then clean them well. As far as the chips are concerned, just through them up into the air and let them fall and you’ll love the job. I applied the top coat and found that it was easier than painting and 1 gallon went a long way

This kit was good and im very happy with the finished floor. Cost was more than the kits you buy from big box stores but was worth every penny.

The product was as advertised with all the parts needed to complete the job. The instructions were good. The product installed easy. The coverage was more than advertised. I had 184 square feet to cover and wanted to put two coats of the epoxy down so ended up ordering two 300 square feet kits. I was able to do the two coats of epoxy with the one kit and do four coats of top coat with one kit. I used one package of flakes for a heavy coverage which hit any imperfections. I think it turned out good and looks really nice.

The armor poxy is an amazing kit, the hardest job was the prep, i rented a diamond wheel grinder instead of doing the acid etch, and did all my basement and backyard 12x12 shed. I habe 550 sq.ft in total and the 600 sq.ft kit was perfect. I really like the finish of it. If i had to do it again i'd buy the same kit, but i would maybe put a little bit less of anti skid powder in the clear coat. I put all the bag in the gallon of clear and you really feel the anti skid, maybe a little too much. I never bought the big box epoxy kit but i'm pretty sure that the armor poxy will outlast any other cheap brand since its a 100% solid epoxy!

Nice product. It is worth the extra dollars verse the box box 2 part epoxy comparable. Sq Ft coverage coverage is pretty accurate. I had 400 sq ft so I got the 600 sq ft kit and had about 1/3 left.