3" Front Lift Spindles 2" Rear Lift Shackles Fits 1982-2004 S10 2wd

94 standard/short 2.2L 5 speed..everything fit fine. great actually. factory 2wd wheels do fit idk why it says you need 17s or 3.75 spacing on 15s. 235/75r15s rub a smidge but nothing serious. seems wider too. haven't lifted the rear yet forgot to get new bolts for the drivers side and didn't want to drop the tank. front clearance looks cool as heck.

I ran into multiple problems while installing the spindles on my truck. Most of them having to do with the poor machining of the product. The dust shield did not fit properly and required lots of grinding in order to fit. Same with my brake calipers. The bolt wholes did not line up and nor did the caliper fit in the spindle without grinding the spindle down to make room. The savings are not worth it, buy a name brand spindle to avoid the headaches.

Item worked as expected,

Over all the product is well made. Spendels loo strong and shackels look better than factory. The spendels come with new dust cover screws but they are cheap and will not tighten well. Use factory bolts for the dust cover. I had to re tap the caliper bolt holes because they were threaded wrong. It was agervatig because I figured this out after a hour of putting on calipers. Re tap to a 7/16x20 before installation and the job is a breeze. Much easier than the 10" lift I put on my 4x4 2500 hd.

It so far has been a great lift and looks good, when I was putting them on I did have to grind off the stops "what keeps the wheel from turning to far" because after the spindles were put on the caliper was in the way of them and the shackles took no time at all to put on... It does not come with instructions so u do need to know your way around your truck. If u are putting this on with a stock s10 30x9.5r15lt size tires will be your best bet other then that there's not much more I can say... All and all it has made the trucks look much cleaner and been very positive, thank you!