Tall 6-Strut Work Stand | CT6

A little on the heavy side but it works perfectly for ripping plywood sheets. I’m 6’2” and the height is about perfect. I would recommend.

The Bora Centipede system and accessories along with my track saw has changed how I work. It has minimized my need to use my table saw and chop saw. It’s lightweight and portable. I can layout, cut, route and assemble on one surface. I bought it for job site use, but leave it up all the time at home.

I’ve got several portable work tables, but decided to try out the CT6. It’s quicker and easier to set up than the others I have, and it’s quite sturdy. It’s not wobbly (it has about 1-2 mm of movement when set up with the CK22T top). I’m glad I went with the 36” legs rather than the 30” legs. I’m 6 feet tall and the height is perfect. The CK22T top can be tricky to set up on the Centipede. Definitely need to watch out for pinches. I think the trick to setting it up is flip it on its side, then fold out the top while on its side. Then set the edge onto the Centipede legs on one side, then lower it down flat. The lock handles aren’t super-precision, but they work well enough. I’m very happy with this bundle!

Great Product!

I replaced saw horses made from plans, and the Centipede is 100% better than those saw horses. I selected the 36" tall (6' x 4') stand for a good working height, which is absolutely the case. The base is sturdy, and lighter than the saw horses, but still not light. I recommend getting the top since it's useless without one or you're going to be using spare plywood. Buy this now, and get rid of all the saw horses in your shop.

It is pretty easy to set up and take down but I wish I had gotten the smaller one. This larger one is cumbersome and you have to learn to take it down and set it up without bending it. To me it seems a bit larger than 4x8 meaning that a sheet of plywood does not sit on all of the outside "pegs." This causes a tiny sag at one end or the other. Sometimes I can turn the little plastic pieces so that it catches the plywood by 3/8 of an inch or so. I would recommend the 4x6 if you are going to be breaking down plywood. a sheet of plywood is too short for the 4x8 centipede anyway. I would buy again, but I would buy the shorter one for the ease of set up and since the end legs are mostly useless anyway, why not? Good Luck....

Works great better than I thought

This thing is more stable than i expected and folds up nicely. I wish it came with a carry and storage bag like some of them do.

The BORA centipede workbench meets my expectations 100%. I am extremely satisfied with the quality and believe it is the smartest workbench on the market today. And with all the smart accessories you can buy for it. You would have to pay thousands of kroner to get something that is just as smart. Highly recommended

Très fonctionnel et pratique pour le chantier... Seul bémol, impossible de régler la hauteur des pieds pour être parfaitement stable sur un sol brut.... Cela se ressent lorsqu'on vient positionner la table dessus...

Great product !

Einwandfrei, wenn mann schnell einen Werktisch braucht. Sehr leicht zu transpottieren. Beim aufbau muss man etwas darauf achten wo und wie die Platte befestigt wird. Also doch die die Aufbauanleitung beim ersten Aufbau hinzunehmen. Und wenn man etwas schneiden möchte diereckt die Antirutsch Tischhunde mitbestellen. Dann habt ihr lage an den Platten.

A bit too tall for me(I'm 5'11") with a mitre saw on it, however my 6'3" apprentice loves it. I also have the 30" and it's perfect.