Ultimate Mounts TV Wall Bracket Mount for 42-85 Inch Flat and Curved TVs Ultra Slim Tilting Mount VESA 100x100mm up to 800x400mm Max TV weight 100kg 38mm Deep For LED LCD OLED Curved Plasma Screens

Good bits:Easy to install. Having loads of holes on the backplate makes it easy to fit to wall - was able to line up with studs in a stud wall. Feels pretty sturdy and hasn't flexed or bent at all with a 35kg TV.Bad bits:Holes weren't all VESA spacing. Wanted VESA 400 holes and the pair I wanted were 395mm apart so had to enlarge them slightly to fit.Tilt adjustment is basically impossible when mounted to the wall - you have to lift TV off to change it.If you have a big screen, you may need a long screwdriver to tighten the safety screws depending where the bracket mounts on the back of the TV.As others have said, ditch the enclosed spirit level - use a proper one.All in all, great value and feels rock solid although installation may be a little fiddly.

I used this mount to fix a 65" LED TV to the wall and found it perfectly strong enough to hold it securely. The installation was easy enough and all the fittings I needed were supplied in the pack (I used the supplied bolt screws to fix it to a plasterboard studded wall). Some people seem to complain about inappropriate wall fixings - but no manufacturer will supply all of these, as there as so many types of installations and wall material constructions, so you need to buy the correct ones for your particular job (I don't consider this is in any way unreasonable).There was one small caveat with the install, however (hence only 4 star rating), in that the integral spirit level was not fitted into the frame straight, so when the bubble showed level, the bracket was actually on the wall on the slope. My advice is to use your own spirit level anyway and then the problem won't occur.Another tip is to make sure that you read the TV manufacturer's instructions regarding wall mounting of your set, as they often specify the max thread length of the required bolts - this will prevent damage the panel by using bolts that are too long.Overall, this wall mount is excellent and I'd recommend it highly (especially given the price)

It's good, does the job. The one i had on my wall was cheaper BUT more thicker and heavy duty. This one is slightly thin, bit it's been hanging an 85 inch for a year now

I bought the mount to move our long serving 47" Plasma TV to a spare room, when I upgraded our main set. The TV is quite a lump and does not have standard VESA holes (yes it's that old). This stand has more than enough flexibility to fit our old TV and is sturdy enough to take the weight. The only difficult part of mounting the TV on the wall was lifting and supporting it while locking up the mount. From experience I'd recommend cabling up your TV before hooking it onto the mount.

We have had this on the wall for little under a year so far, it holds a 55" LG LED TV to a dot and dab wall with no issues (secured with the proper fixings of course), it did come with lots of bolts (which I didn't use), an inbuilt spirit level, and took little work with 2 of us fitting it and hanging the TV.

Great mount, easy to fix to wall but and it's a big but... do check with a separate spirit level!! The inbuilt one is OUT!

Takes the weight of a 60 inch TV Ok, but tilt will not work once TV is on the wall - and the adjusters are .... yup - on the inside where you cannot get at them. Doh!

Easy to fit great built in spirit level very sturdy