Nilight Truck Running Board Lights 2PCS 60 Inch LED Side Maker White Courtesy Light & Sequential Amber Turn Signal Lighting Strips Kit for Trucks Pickup SUV

Overall the product is nice and very bright. Connections and wiring are simple to accomplish in an hour. The only issue I had is the supplied screws for the light mounts are junk. Every one I tried broke and now I have a few broken screws in my truck bed.

This product is perfect to light up the bed of your pickup truck. I have the 5’7” short bed full size truck and the light strips fit perfectly on each side. The quality of this product is good and the light covers the complete bed. At night, you can see to the back of the bed easily. I wired mine to the battery so that I can use the provided switch to turn on the lights when needed. If you wire them to the vehicles light system like the bed light, they will time out with the vehicle. This can be annoying when you’re unloading lots of stuff at night. Highly recommend this easy to install product and an affordable price.

Installed these on a 2018 Toyota Tundra with an ARE camper shell.Pros:These lights are plenty bright to light up the bed of a truck. No need for a front or rear strip. Just the side strips are plenty. The adhesive they come with seems to be plenty strong. Was doubtful they would stick to the carpet but they seem to be doing fine. Time will tell. Wiring process is pretty straight forward. There’s plenty of extra cable attached to the lights themselves to reach wherever you place the splitter. Seem to be pretty durable. Lights are encased and seem weather resistant. They come with mounting tabs which could be useful if the adhesive isn’t enough. Can’t use when installing on shell tho as it would screw through roof.Cons/Heads Ups:The supplied butt connectors are cheap. If you are using an extension I would purchase heat shrink weather resistant butt splices. The extension wire they supply you with isn’t very long. Maybe 6 feet. For my application I had to run power from the battery so a much much longer extension was needed. The negative is plenty long to reach a ground. They also do not supply any ring splices to connect to battery terminal. The power switch does not have any holes for mounting screws or adhesive attached.Overall these are great lights and are well worth the money. The cons listed aren’t really cons as much as they are a heads up to those wanting to install yourself. I’m a heavy equipment tech so I had everything I needed readily available. Just buy an assorted splice kit, ~50ft~ of wire, electrical tape, and maybe some loom if you’re OCD lol. But I would say any novice DIY’er can do it!

We got this set of LED under-car lights for our son for his first car. I helped him install them and it was very straightforward. There are a lot of videos out there that show installation of this kind of light kit, and most of them are pretty bad. If you want it to look good, take your time and find places to route the wires so they don't dangle down under the vehicle or risk getting tangled in moving parts of the car. We routed a lot of the wiring from under the car through the body panels, behind the wheel well liners, and up into the engine bay to keep everything clean. Be sure to have lots of extra zip ties on hand for wire management.Even with lots of pre-cleaning to the mounting surfaces, the adhesive on the backs of the light strips wasn't strong enough to permanently adhere the lights to the underside of the vehicle. The adhesive was good enough to keep them in place so we could secure them with the provided brackets, but the mounting screws needed pre-drilling in almost every location. That made installation take a lot longer, but I'm a lot more confident the light strips will stay in place.As for the lights themselves, they're super bright! They're somewhat visible during the day, but really pop at night. Even with the receiver module mounted under the hood at the firewall, the remote functions just fine from inside the vehicle. Because we mounded the receiver in the engine bay, the music-syncing function only works while the engine is off. Otherwise, the sound and vibration of the engine is too strong and drowns out any music that might be picked up by the module. With the engine off, the music from the stereo really puts on a show!

Simple install and works perfect ...... Super bright and lights the entire bed.

Measure the space you want to mount these, amazon said they'd fit, but they were too short to cover the length of the running board. They're mounted don't look too bad , contemplating ordering longer strips to fit.

Están increíbles, los materiales los mejores con los que he trabajado, las intensidades de luz son buenas y se ve el color parejo, los cables me quedaron cortos pero me las ingenie espero poder adquirir una extensión para la parte de enfrente. Saludos

I bought these as a gift for my husband since he doesn’t have a cargo light on his truck. He really likes them!! They’re bright and he wired them in with the park lights so even better. Picture doesn’t do brightness justice but so handy to have! Affordable in my opinion and easy to install.

Se ve de buen material y resistente, viene bien sellado. Le quedó perfecto a la caja de mi Silverado, alumbra excelente espero y dure mucho tiempo. Las tiras las fijé con sinchos ya que con la cinta adhesiva no creo que durará mucho pegada.

Very bright and still working great after a years use even in the cold winter weather