ZONESTAR ZRIB control board is the combination of MEGA2560 plus RAMPS1.4 and A4982 in 3D printer. It is a feature rich all-in-one electronics solution for RepRap and other CNC devices. It features an on-board ATmega2560. Its five motor outputs are powered by A4982 stepper drivers. It use CP2012 for USB. The board can use the same firmware as Ramps1.4. The input voltage range is 12-24V. It is supplied with a P802N firmware default and you can upload other firmware, such as IDE, Cura etc, through the USB port.Specifications: Brand: ZONESTAR Voltage: 12V - 24V Item Size: 11 * 9.5cm / 4.3 * 3.7" (L * W) Item Weight: 77g / 2.7oz Package Size: 11.5 * 10 * 2.5cm / 4.5 * 3.9 * 1" Package Weight: 79.5 * 2.8ozPackage List: 1 * Control BoardNote: 1. Before power on, please make sure that the positive and negative is not reversed. 2. Do not plug when the motor and drive is powered on, it will easily burn; do not adjust the current when the motor is running. Disconnect the power first, unplug the motor, and then re-power, adjust potentiometer, measure the voltage on the potentiometer until the measured voltage is the same as expected. Do not insert anti-drive, otherwise it will burn drive, or even burn out the motherboard.
Trustpilot
Hace 3 días
Hace 1 semana
