Xitomer Tail Tidy Fit for MT-07 FZ-07 2021-2024 YZF-R7 Fender Eliminator Bracket with LED License Plate Light for OEM &Aftermarket Turn Signal

Easy install. Instructions not really needed but we're nice to have just in case. Wired in easy had to cut the wires to my OEM turn signals to fit them in but swap was super simple. No issues here looks way better than stock tail assembly and sturdy enough for what it's supposed to do. Just wish there was a way to adjust plate angle.

Just be mindful you would have to splice the eliminator plate light wires to the original connector. So not really plug and play. The license plate itself is somewhat bendable so you can adjust to clearance of the plate light itself.Wires are thin in the kit in caparison to the original wires so be mindful they can easily be broken. Comes with plenty of zip ties and heat shrink sleeves. Also the space the wires come in the bike from the turn signals and license plate light leaves a substantial gap in the kit so you might want a gasket just in case to prevent extra moisture.Funny thing is I still haven’t put the nuts and washer on the back of my license plate light, but it hasn’t gone anywhere after a 100 miles.But all in all I’m satisfied with it for the price. Makes a huge difference in styling!

The media could not be loaded. Wow this makes the 2021 MT07 look so much better. Easy install, just remember stock blinkers you gotta cut out one piece, very easy. Just look at the instruction card inside. Throw some lock tight on the bolts that hold up the plate so it never vibrates off!! Seen it twice. But 10/10 recommend this product

Mildly annoying to file down the brackets for the stock blinkers. But everything fits and works just fine. Especially for the price. LED for the plate is quite bright too.

I don't know if you guys have actually tested this or not. But it's clear you messed up.I spent an hr or so getting this apart to realize the blinkers are not going to fit. The locking mechanism(rubber and a piece of plastic) are the only thing holding this on.Your cut outs do not allow the rubber grommet to feed through the plate.Your bad description and "item fits" is absolutely false. Now I've wasted 2 hrs for nothing.The metal I'm sure is durable but this product is not for the 24 MT-07. For whoever made this part, quit being lazy and actually attempt to use it on the motorcycle you are listing it for. Instead of the metal connectors for the insert being on the horizontal, they need to be on the vertical axis.Also ..your paper directions are not the same for the 24 model. So all in all, someone didn't do their homework. Must be pretty telling about the seller to make cash quick rather than supply a proper product. The assumption that everything is the same without testing is the reason I'm in this position.And you are dang right I'm salty about it. It's 94° outside and I have nothing accomplished besides a wet back and irritation. Thank you for that.To add, even if the metal was cut with the correct inner supports, your hole diameter for the wire is too small, forcing me to disconnect the pins and take apart the connector. So not only does it not fit, I feel as if I could have saved a solid 15 minutes by just feeding the connector through a hole.Good idea, terrible execution. 1/10 for effort. Do better.

It does work on a 2025 r7

Item feels durable (not cheap). Easy install but the directions weren't that great. The plate light is at weird angle and very bright for those behind me. Would be perfect if it was adjustable somehow

Worked great for my r7 and was a major upgrade. Took about an hour or so to replace.