SparcoOPC04060000 Alu Racing Style Crankset, Aluminium/Black

Neat pedals - but again I bought them to match the Sparco shifter to go on the T3PA-Pro pedals on the T300RS. They're slightly more of a curved surface than the stock T3PA-Pro pedals provide, but they fix fine with no movement whatsoever - you just have to be slightly more careful when tightening them as the screws already with the rig must be used (those supplied are too short by a way) but the heads of the screws don't precisely fit into the middle of the holes when tightened (the screws themselves thread with zero problems I must add). But they don't require mechanical adjustment to fit. You just simply have to have the screw highest up the pedal almost entirely flush/perfect fit and the lower one slightly less so - they is ample tightness there for proper use and the screws don't protrude - it's just that when tightened they don't sit absolutely central in the recess hole in each pedal - a minor cosmetic thing that you cannot notice when you're using them. As they are holed down the central left and right sides (rather than dead down the centre as the stock pedals are) you are going to have to attach them slightly one side or the other of the pedal base - but they leave no pedal behind them so fit perfectly - just ever so slightly to one side. Just be careful you don't over-tighten the lower screw in each pedal as because the screw head doesn't sit entirely central in the screw hole on each pedal, over-tightening will likely cause the screw head to bend ever so slightly. You can easily tighten them firmly without this happening whatsoever - you just need to not get overzealous. They have a lovely brushed aluminium feel to them and looks really smart without being overly showy. Recommended.

The pedals arrived on time and looked like a good product. Fitting them took a bit of measuring and some solid drill bits but I got them fitted and they look great. Easy install for a good price and build quality. Would highly recommend for improving any cars interior! Look great with the matching Sparco gear stick.

Bought them to mount on my Thrustmaster T-LCM, if you're going todo this then I'd advise mounting without the platic spacers as the Sparco screw holes dont align perfectly with the TM ones (only a few mm out).

Big upgrade to the stock pedals in my car.Size wise they're fine, small bit bigger than the stock ones in my Lancer. They were a bitch to get on, drilling the hard metal of the stock pedals at an awkward angle but it still took me only about an hour tops with my sub standard drill I was using.Only negative about them for daily driving in a wet climate is they can get quite slippy under your shoes but nothing terrible just occasionally you can slip off the clutch a little so be aware of that when thinking about buying them.I've had them on my car for a few months now and well happy with them.

Ime not the best to qualify for a proper review on this product as I did not buy for my car but rather for my sim racing rig although I have to say on a decent rig they were perfect better than those supplied or on other rigs I've tried fully adjustable for comfort & just enough surface area for smooth operation within minutes of applying my lap times tumbled

Make sure you have a good drill bit took me a while to drill the brake and clutch pedals.

Came today, even tho the driver left the card through the wrong door, never tried my place and then left it behind a bin. Amazing product tho, fitting was fiddely on my ZR but the results are stunning.. would reccommend

put on my thrustmaster pedals for sim racing, looks the part now, love um, thank you... :-}