Dorman 919-219 Stainless Steel Brake Line Kit Compatible with Select Chevrolet/GMC Models (OE FIX)

The media could not be loaded.  These Lines are a direct OEM replacement for all of your brake lines, they fit as they should. I already had the bed off to do fuel lines as well which helped. Remove the driver side cab bolts and lift the cab off the frame for easier access to remove and replace the old lines.

I broke a brake line... the rear of all things, and on the silverados it runs from the distribution block to the rear axle, above the fuel tank. What a pain in the butt! I did not feel like changing all the lines yet, therefore I of it to work with the time and tools I have.It bolted right up, the fittings were perfect, length was great and when I do the other lines I know these will fit great. I would buy again, but I hope I dont need to. And I would recommend to a friend

Better than factory replacements and cheaper.

Run rear line thru frame channel made it easy

Complete line kit

Replacing brake lines is not fun when the whole rest of the vehicle is there but a couple of hours on your back in the driveway (a lift would help) and you can drive the vehicle again, being stainless you should not have to change them again.

My husband asked me to order these for him so he could redo the breaks on his 2005 Duramax and he set out today thinking it’d be a couple day job, and he just finished in about 4.5 hours, came in and told me to make sure I give these 5 stars. So here I am!

These fit 2005 Silverado Crew Cab 6.5 Bed with Duramax Diesel.Working on rusted brake lines is never fun.Having a new set up pre-bent brake lines on hand before you start is the way to go.I used an oscillating blade to cut the old lines off flush with the tube nuts so a socket can be used to un-thread from the ABS Pump and Brake hoses.Started by installing the rear lines firsts. The "T" on the rear end housing doesn't line up with the mounting bracket on the rear end housing. Within half an inch but not able to get the bolt into the mounting tab. Not a huge deal and I'll tweak or fabricate a new bracket once the weather warms up.RH Front line I installed next as it was the longest and most difficult to fish through the maze of wires, brackets and routing under the radiator and up over the RH Frame rail.At the ABS Pump I worked from frame rail towards transmission, top to bottom and had good access for hand wrench to tighten everything.I installed new stainless flex lines at this time also. Russel 695770 which fit well.Lines all had to be tweaked a bit as they come folded or rolled in strategic locations to allow manageable packing size. Use caution when straightening out these bends, go a little at a time and try to make the line straight as possible.I hope using stainless lines to never have to redo this work again!

This job is a real pain. And I'm saying that as a guy who already removed the hood, fenders and bed. The passenger front line should be two pieces. Otherwise the kit is close enough. The hardest part for me was getting the lines on the ABS module in the right order.2006 Duramax.

Came as described and worked perfectly. Thanks.

This was a tough job, but having these prebent lines made it easier. Passenger front was the toughest line forsure. The rear line through the frame rail was tough aswell. Lines arent an exact match, but you can bend em around yourself after you have the lines in place. I was able to get the lines in the stock plastic frame holders and everything. 10/10 would recommend. The stainless lines do feel a bit different in the pedal. Overall great product. Price has gone up a bit it seems over the years $180 i payed but it was worth it and fast shipping aswell. Was delivered to my door within a week

Replace rusty steel brake lines with Dorman stainless steel lines

Was easy to install on a bare frame😀Very good fit. I'd say 98% perfect fit.Stickers to show you exactly where to bend the pipe and good labels so you know which line is which.