Decko Products 49147-10 Heavy-Duty Shelf Bracket, 14.5-Inch X 10-Inch, Black, 10-Pack

Nothing to dislike. You cannot find this large size in big box stores. I did find a few at a hardware store but I needed at least eight brackets. The hole issue was not a problem as mentioned by other reviewers. The two off set holes are needed as it where most of the weight is supported so the brackets cannot get pulled out of the wall. They have a nice powder coated finish and all were straight with 90 degree bends. I used these at my church in a small room that had a commercial dish machine that was remove and no longer used. 1"x3" boards were anchored with self tapping screws (#12) to metal studs with the brackets screwed to these boards. These shelves are 20" deep but the brackets would have no problem with 24" shelving p. I used all ten, plenty of support even for cases of water. The 1"x3" boards were left as is so an additional shelving could be added if needed.

Very sturdy. Came well packaged. No issues at all. Good price.

Bought a 10 pack of these to put up shelves in my garage. I installed them with the short side against the wall, and used 24” deep shelving boards. Everything came together great and the shelves are very sturdy.NOTE: these do NOT come with any screws. You will need to provide your own screws to connect the brackets to the wall and the shelves to the brackets. Make sure you use heavy duty screws and put them into studs - these are big brackets and will hold a lot of weight if you mount them securely. It would be easy to put too much weight on such big shelves if you don’t use hefty enough screws.All in all these were exactly what I was looking for to build 24” shelves.

Read some concern if the brackets are welded. They are not. They are crimped into place. If you want a shelf to hold your car, look elsewhere. If you want a shelf to hold general storage / christmas / winter clothes, these work fine. I sank these brackets into wall studs and they were more than able to hold my 200lb human form grabbing and hanging on them. Put some boards across the top, throw your stuff up there, move on.

The brackets are well packed, look nice and solid. I use the long arm to support 20-inch shelves. I find most of the arms not perfectly flat or level. Out of the 7 that I took out of the box, only 1 keeps the bubble centered everywhere in the long arm. The other 6 were arched or twisted slightly. But all but one were usable. The bad one was bent too much.

I read a lot of the reviews and saw some folks were unhappy. Regardless, we decided to try them out. We ordered two boxes, one regular and one from the "warehouse deals" which had "scuffs." Both boxes were in great condition and the ones with scuffs did have minor blemishes but the discounted price was worth it. Overall, these were easy to install, heavy duty and look great. Highly recommend!

My mistake was buying them with the bar going 45 degrees. Takes up space. Should have just kept it L shape. I did spray paint gold and looks much better with the sanded and stained wood shelves I made.

Product came quickly, nicely constructed, I like the hole placement.

The brackets are well constructed and quite solid. They don’t sag under weight of items now on shelf. The pre drilled holes for installation were nicely offset for angling and catching wall studs. I will buy more of them.

I used these brackets to replace old brackets for a client and they support a ton of weight and look great. If you need a sleek (not perfect welding or squareness) bracket these are strong and very cost effective.

Used these to hold up my craft table along the wall.

Put up some of these for shelves in my garage. They seem to be well built for the price when compared to any of the big box home improvement stores around me

I have a kitchen table that was wobbly. I used 8 of these supports and the table is now so sturdy I could dance on it. They were also small enough that legs do not hit the support when sitting at the table.