Froth Pak Dow 650, 2 Complete Close Cell Spray Foam Insulation Kits, Class A fire Rated, Covers 1300 sq ft

it work like it should, little messy with the cone tip. but Fan tip worked great very little over spray and easy to control.

Good product & easy to apply. It would be nice and less confusing to connect the dispensing gun and lines to the tanks if they were color coded to match the dispensing lines. If the tanks each had a different size connecting valve that would only accept the same connector from the gun would work too.

Nothing wrong product, just wish I'd purchased (3) 200 kits instead of (1) 650 kit. As a DIY homeowner it is difficult to deal with the 650 kit's canister weight. My fault. Manufacturer does a good job with online product information and well labeled packaging which very clearly states "For Professional Use" and that is true. Very important, it instructs "Shake Well" for an extended time. WHAT IS YOUR PLAN? You aren't going to adequately shake that 650 kit canister by hand. You might shake a 200 kit canister well enough by hand but not a 650 canister. Adequate mixing clearly required with failure potentially resulting application failure.The 650 kit means you'll like someone to move (2) 40lb containers along as you spray. If your job site looks like the mfg product video and you have a helper, Great! get a 650 kit.Consistent application. 650 or 200 the spraying process may be paused and restarted. But that is a process requiring cleaning the gun with the optional cleaning kit and may require remixing and rewarming canisters to restart spraying. For a DIY like me I will prefer to get conditions proper, spray with a 200 kit, and stop when the canister runs out and I will expect less chance of variation and a consistent application. I also expect I will stuff up my nozzles more than once. With (3) 200 kits I'd have (3) hose-gun-nozzle sets and be glad to have extra hardware.

I used 2 kits as part of insulation for a detached garage - 2x6 construction with 2 in of foam then fiberglass. I used it to seal all the gaps and add some R Value. I made sure it was at temp, shaken like a Bond martini and applied as directed. Good product and fun to install, but divide the coverage estimates by 2, as other comments stated — I.e. measure what you want to cover 2 inches thick and double it.

Worked great, I was filling eves up so it was a bit of a task and long hoses would have helped but other than that it was simple to set up and use.

Worked great. I was anticipating it to not go as far as it did. Very happy.

I purchased two 650 kits to do a 12x28 barn style shed, walls and roof. I got it all sprayed with the two systems, but I wish it had better coverage. Just didn't seem as thick as I would have liked. Do follow all directions concerning personal safety equipment. Not the place to short cut it. Also, the tanks temperature must be 75 degrees or better for proper performance. The system sprayed nicely. It was easy to use. I had my tanks on a wheeled cart so that I could move around quickly. According to directions, if you stop spraying for 30 seconds, you'll have to change out spray tips. I did the walls and roof with a single tip each as I never quit spraying. Both tanks emptied together, so there was no waste. Easier than stapling in installation and it filled spaces within the construction that standard installation would have missed. I can't speak on the performance of the insulation itself versus standard type insulation.

This product was VERY easy to use! We were very happy with the results.