True Mods 3ft RGB LED Whip Light for UTV ATV [RF Wireless Remote] USA Flag Waterproof LED Lighted Whip CB Antenna Pole Stick for RZR Can-Am Polaris SxS 4x4 Quad Dune Buggy 4 Wheeler Accessories

We purchased and installed the  ONLINE LED STORE 4ft LED Whip Lights w/Flag [21 Modes] [20 Colors] [Wireless Remote] [Weatherproof] Lighted Antenna Whips - Accessories for ATV Polaris RZR 4 Wheeler The wife requested a removable LED whip for her Jeep JKUR Recon for cruise nights, and night-time off road use. It can also be used to provide set-up lighting when setting-up camp after dark, or assisting in nighttime rendezvous with other group campers, also night-time trail/dune safety. We chose the 4 foot whip because it was already mounted quite high off the ground on the lifted Jeep. Note, the 4 foot whip as mounted, will NOT clear normal/slightly higher than normal garage doors and must be removed and stored. Depending upon trail conditions with low overhead clearance due to vegetation, a shorter 3 foot whip may be a better choice than a longer 4/5/6 foot whip in this case.Installation - Was simple as we had already installed a TeraFlex reinforced tire carrier with a Hi-Lift jack bracket which has two antenna holes. One was in use for a Firestik CB antenna, the other was available for a LED whip light. On Jeep JKURs, there was a 12 vDC outlet inside the rear cargo area (passenger side). The anodized aluminum mounting socket (silver*), at its bottom has a steel metric hex-head bolt, washer, lock washer, and a nut to mount it in a mounting hole.*Note the manufacturer's website shows the mounting socket as black, not the silver anodized we received (and silver is pictured on Amazon) if that's important to you. Only small issue we saw from a hardware perspective was the vertically oriented steel hex-head bolt recess could collect water and rust over time (making removal difficult when inserting a hex wrench in a rusted hex bolt socket), this is preventable with stainless steel hex-head bolt substitution. The flag clamp bolts and ny-loc nuts appear to be stainless.Power Cord - The LED whip includes about 4 feet of power cord, so power was easily available (with several feet to spare) by adding a male 12vDC cigarette power plug to the (solder finished) end of the whip power cord wires. The LED whip strips only draw between 1.5 amps (3 foot) to 3.0 amps (6 foot) 12vDC depending upon the length for the whip.General Construction - The LED whip appears to be made from a clear flexible polycarbonate tube (some folks prefer a opaque/milk white tube for more uniform lighting than LEDs in a clear tube. The clear tube has three interior LED strips running the length of the whip, providing multiple programmed colors and patterns, including white, and solid or variable colors (see JPG of remote details). The whip also has the following flag mounting hardware - two adjustable rubber-padded tube clamps with stainless bolts and ny-loc bolts, and two aluminum carabiner loops to mount the included USA flag - or another safety flag of your choice.Detachable Whip - The mounting hardware allows for easy removal of LED whip when not in use. The mounting socket best resembles a special oxygen sensor socket tool with a wire slot along its length, to allow for the power cord, and to hold the whip firmly. An easily removable "round wire locking retaining pin" (see photo) holds the whip shaft in the mounting socket.The detachable power cord is of simple, and with careful use, reasonably reliable design. It won't likely stand up to rough use/abuse so be prepared for possible repair at some point. We recommend sliding the whip and its power cord carefully in and out of the whip mount socket when installing or removing it. The long part of the power cord is detachable (if desired) from the whip via a screw collar retainer and an indexed two-connector male and female connector that has an o-ring seal. If treated gently, this mount, retaining pin, and simple power cord design should be fine compared to other trouble-prone interior/integrated/proprietary power sockets. When the whip is removed, no connectors are exposed to moisture/the weather for corrosion considerations. Note: Product posting on Amazon claims an IP65 waterproof rating, manufacturer's site does not mention an IP65 rating. The whip tube is sealed with a flexible sealant at the bottom and a black cap (possibly with sealant) at the top.The small RF wireless mini-remote thoughtfully comes both with a CR2025 battery installed, and an extra CR2025 battery. Be sure to remove the clear battery isolating/shipping strip before using the remote.Specs from the manufacture's site:"The OLS RGB LED whip comes in multiple sizes and have a universal mount, making it suitable for all types of off-roading automobiles. Combing the prominence of a sand flag and visibility of RGB LEDs, the LED whips offered here promotes both maximum safety and style. Packed full of different modes and numerous color selection, the OLS RGB LED whip with flag comes with a RF remote control, allowing you to set it at a color to match the trim of your wheels or to suit your mood for the evening. Whether you like kicking up the sand cloud with your ATV, UTV, dune buggy, or sand car, equip your wheels with the OLS RGB LED whip and make your presence known to everyone around.Interchangeable/Compatible with: All automobiles and devices equipped with a 12 Volt DC power source.Features:USA flag with secure flag clips included.Universal mount and waterproof construction.Remote control for ease of operation.Flexible whip capable of handling the strongest of winds.Bright RGB LEDs add style and promotes safety.Product Content:1 x LED Whip1 x FlagWhip Mounting AccessoriesFlag Mounting AccessoriesInstruction ManualSpecifications:Input Current @ 12V:3ft: 1.4A (+/-0.1 A)4ft: 1.9A (+/-0.1 A)5ft: 2.5A (+/-0.1 A)6ft: 3.0A (+/-0.1 A)1 Year Manufacturer Warranty"

I ordered two of these and one of the packages showed up taped up after looking like it had been through a beating. It was missing a flag bracket. I contacted the seller and they informed me that it was stored and shipped from Amazon and apologized for the inconvenience. They immediately sent out a replacement bracket at no charge. The product is great quality and very easy to install and remove with the quick connections. Very happy with this product and the seller!

The media could not be loaded.  I bought 4 of these and installed 2 of them on CF moto 600, they work and look great the only issue is all 4 of them work on all 4 of the remotes. This causes the 2 to flash different modes, they will obviously both change to the same solid color you choose but when you hit the mode button, they will change to different modes so they do not match. Not sure if there is a way to rectify this or not. Other than that when installed individually they work great,UPDATE so my daughter figured out how to match the modes on both whips at once you have to set 1 on a mode then unplug it, hit the mode button on the remote till the 2nd whip matches then plug the 1st one back in. We had to do this a couple times to get them to match flashing speed & color patterns but they both match perfectly now. I still wish all 4 had separate remotes so when she changes hers we'll have to be far apart from each other in the dunes to prevent it from changing mine and vise versa.

I put it on my side by side ATV for night riding. I love the American flag on top.

Very broke installed less than twenty minutes

Bought these a year ago for our side by side. Love them just wish the flags were made of some different material so the would not Frey and tear in the wind while riding I have to replace them already.

Update. Have been in contact with company and they are sending a replacement. I will keep you postedI have had this product on my jeep for less then 3 months. It is poorly made the top plug piece flew off. i didn’t realize the top piece flew off so now water has gotten into it and it has a mind of its own. Turns on when it wants to by itself and only illuminates blue.

Perfect for my Polaris rzr looks awesome.