SOPOGERArchery Bow Square T Shape Ruler Measurement Tool Kit for Recurve and Compound Bow Accessories

Not much to it , though the markings were engraved into the material, not just painted onto it ! Have only really used it once at this point , but so far , so good ! You could probably pay more for a tool that was no better in any significant way ...

This is on the flimsy side of T squares I’ve used, but it’s also thinner and lighter. Great option for carrying in a quiver. And the red finish is pretty!

works.

As advertised and arrived early.

Its square and holds the string tight, but it was sharp everywhere, including the clips for the string. I took a piece of 600 grit sand paper to all the edges and inside the clips. I would not recommend this one if you know another brand is already string safe smooth; but if you have some fine sand paper already sitting around and you want to save $2, go ahead and get this one.

Perfect

It’s useful as intended. The only down side is that the metal is too soft.

The media could not be loaded. This ruler fails at the most basic feature of having accurate measurements. The 4" mark is 4 1/16" from the edge, and if you zero at 4" then the 12" mark is at 11 15/16". The metric side is just as bad, being 3mm longer at the 10cm mark, and 2mm short overall when zeroed at 10cm. The ruler is as malleable as cheese. It came bent and does not spring back, so make sure it's straight or the measurements can be even more inaccurate. Another issue is the T square clips are loose enough to allow several degrees of play, unless you shove your string down farther to be flush with the ruler (not recommended due to the risk of cutting your serving). I returned this junk and will just use a standard ruler.