Question 1

Would this fit an old school West Bend electric Wok?

Accepted Answer

Thank you for your interest in this item.

This cord fits Crock Pots & Slow Cookers With Pins .5 (1/2) Inches Apart.

West Bend Models: 84861, 84966, 84915, 84765, 84755, 84696, 84716, 84846, 84856, 84866, 84905, 84906, 84907, 84908

Replaces Part Numbers: P193-74, P19374, CO-PC6, COPC6

Thank you!

Question 2

Will this fit an old +30 yr farberware superfast 12 cup percolator?
the old cord is a 2 prong ta 9 : 54-250 v / 10a-125 v & ta hsing / e-74893 .

Accepted Answer

This is from the distributor:

West Bend Crock Pot Replacement Slow Cooker Power Cord Replaces P193-74

Replacement crock pot cord made to fit many West Bend crock pots and slow cookers. Slow cooker power cord fits many West-Bend models including the model numbers listed below. Fits crock pot and slow cooker models with pins .5 (1/2") inches apart. 6 Foot Length. This cord is a 2 prong cord. Does NOT fit models that use 3 prong cords. Please note that this slow cooker cord is an aftermarket cord that replaces the West Bend crock pot part number listed. Replaces West Bend part number P193-74.

Fits Crock Pots & Slow Cookers With Pins .5 (1/2) Inches Apart

West Bend Models: 84861, 84966, 84915, 84765, 84755, 84696, 84716, 84846, 84856, 84866, 84905, 84906, 84907, 84908. Replaces Part Numbers: P193-74, P19374, CO-PC6, COPC6

I cannot confirm whether or not this fits the model percolator you have, however, if it does not fit, you can return it to Amazon for a full refund.

Thank you for your interest and your question.

Question 3

Will it fit old 6 cup Corningware percolator

Accepted Answer

Most likely not. 95% of Corning ware percolators need a very rare cord with 3/8" spaced holes (from center to center). This cord has holes spaced 1/2". The width of this cord plug is 15/16" which is too large to fit into 95% of corningware percs. The 3/8" spaced corningware cord is very rare. But some models do in fact use this size of cord. If inside of your plug opening measures 7/8" wide by 1/2" height, then this cord will absolutely Not fit.

Question 4

Se adapta a una  olla arrocera?

Accepted Answer

Some, but not it may not fit your model. Please reach out to professional seller directly to find out. Include measurements of you plug opening, height and width, pin spacing measured from center to center, pin type (round pins, flat flat, 2-pin, 3-pin, vertical pins, horizontal pins, the brand, model #, voltage and wattage or you rice cooker and a professional seller with experience can tell you exactly what you need. There are too many rice cookers/cord styles to give a general broad yes or no answer as that will surely confuse other potential customers. I personally deal with 8 Different rice cookers that take 8 completely different cord sizes/styles/versions.

Sobre nosotros

Servicios al cliente

Atención al cliente

Acceso Regional

Legales y políticas

Social

Obtén la aplicación

6 ft West Bend Coffee Urn 58036 58002 Power Cord 2 Pin replacement part 6 FEET

Descripción

¿Tienes una pregunta? Mira lo que otros preguntaron

Preguntas comunes