WDMTCART3T-BLK

I’ve been searching for a rolling shelf/cart that would properly fit my Silhouette, Cricut, and printer, and this one is exactly what I needed. Another crafter recommended it to me, and I’m so glad I went with this one. Most craft carts are way overpriced, but this one is very reasonably priced and works perfectly. One of my favorite features is that the shelves don’t have a lip, so vinyl feeds smoothly without catching — which is huge if you work with vinyl regularly. The cart is wide enough to fit both my Silhouette and Cricut comfortably, and the shelves are tall enough to hold the machines without feeling cramped. I plan to put my printer on the third shelf, and everything fits great. Assembly was super easy, the wood is nice quality, and I love that it has rolling wheels, so I can move it from room to room as needed. It’s sturdy, functional, and designed really well for crafters. If you’re looking for an affordable, practical craft cart that actually works for cutting machines, I highly recommend this one.

This is a great rolling cart for what I'm using it for, which is to put stuff on and move it around the kitchen/dining area to where I need it when I need it. it normally sits in a corner otherwise, where it's out of the way. Putting it together was a breeze, even for someone who doesn't' get around too well these days. I read the directions once and then assembled it in about 30 minutes. DON'T TIGHTEN ALL THE SCREWS AS YOU GO! Get them finger tight and then place the shelf on the floor to level it, without the rollers. You just put a little pressure on the top shelf and you'll feel it level, then hold it in place while you tighten all the bolts on one shelf to hold it in place, then tighten the other bolts. The rollers were the most annoying to put on because there's over an inch of thread on them and you have to use a little toy throw-away wrench they send to install them. You can't just screw them on, of course, because they swivel. The shelves just lay in the brackets when you finish. They are thin, about 1/2 inch, but very sturdy and beautifully finished on both sides, though I'm sure it's a laminate. I keep a bamboo placemat on mine so that I can place hot pans and dishes directly on it. I'm not sure how the finish would stand up to heat. All in all a great buy!

So far so good! It took me 20 minutes to assemble. I figured out the assembly by the diagram and common sense kicked iin after my second cup of coffee. 3 suggestions: #1 Make sure the long corner things are set up so that the flat end is at the bottom - this is where the wheels will be screwed in! #2 Make sure the metal shelve frames are set up where the wood slats can fall in - I set up one shelf upside down which will not let the wood shelve sit comfortably! Also, #3 Do not 100% tighten all the metal screws until the entire unit is put together. After inspection, just tighten them all! I set this up near my kitchen island and placed my HP printer on the middle shelf - perfect fit! So now the entire unit can fit neatly under my island! One negative - one of the holes did not line up so I could not screw in the screw - not a big deal. I just got a black zip tie and secured it. Also, I think it would be better if we can adjust the height of the shelves - this would take the manufacturer to just drill extra holes along the poles! Yes, I would recommend this!

Product as described, very easy to put together, durable

Pros: VERY easy to put together. Nice and sturdy once it's together. Not too big as to take up a lot of space. But big enough to be able to get quite a bit of stuff on it for storage. The boards are not real wood, but they look nice and you actually have to touch them to be able to tell they are not real wood. Cons: VERY easy to bend. One customer showed pictures of theirs being somewhat bent when they took it out of the package. In all reality it is so easy to bend you just bend it back with your fingers. So in that respect I was a little unsure of how it was going to work. You need to be careful when putting it together. AND I don't think you would want to man handle this thing or put something really heavy on it. But for craft supplies it is just perfect.

Great cart for what I needed. I needed a cart to place a couple of Cricuts on and this works great and looks nice as well. Assembly was quite simple and did not take long. It is actually sturdier than what I expected at this price point. The wheels roll very easily and even lock when needed. It is same height as my desk, so it fits nicely at the end. Highly recommend this cart!

So for the price point, I really wasn’t expecting much. But with the reviews as they were, I went for it. First of all, super easy to assemble. Under 30 minutes no problems with getting the screws to line up or anything. The only downfall is that the shelves are particleboard. So very easy to damage. And they did include a sticker on one shelf which one I removed it took off the finish. So I just left the shelf over. Other than that, I am very pleased with this purchase.

The holes don't line up, the cart is not level once assembled, and the screws stick out the sides. It looks great in the photos here on Amazon, and when I unpackaged the pieces to assemble it, the parts all looked great too - but the assembled product is bad. Like, so bad. There are a lot of screws that stick out the sides like Frankenstein's neck - this is a hazard for anyone who cares about their clothes at, say, a party where you have a bar cart. These screws are just waiting to snag someone's nice dress. And the cart itself is wobbly like nobody's business. It's like the cart is drunk, it just won't stay straight. The cart is so unlevel, all four wheels will not touch the ground at the same time. Drinks are going to spill if they have to sit on this thing. We are returning it - after we spend time taking it apart and getting it back into the box and driving it to Kohl's. This cart is a time suck. Do not buy this cart.

kaufempfehlung! das regal ist schnell zusammengebaut, durchdachte konstruktion, saubere verarbeitung, aber achtung: die höhe des regals beträgt 92 cm ohne rollen!!!!!

Sturdy and beautiful trolley for Multiple usage . The company has given good quality product and such a price. Recommended.

Out of the box, this was easy to open and to lay out on the floor and work out what piece goes where. The instructions are fairly standard for this type of flat pack product, consisting of diagrams which take a bit of looking at and thought but I didnt encounter any real problems. When assembled the unit in nice, sturdy and functional. All in all a great purchase

I took 2 months to finally decide to order this based on reviews. Big mistake. I paid DHL for expedited shipping. But the mistake was in poor packaging. Not DHL. Who uses bubble wrap to LOOSELY wrap steel. It is misleading to to advertise "Great Quality construction" because I had to HAMMER the steel from inside out so that it could align with the rectangular shelving rack. 3 out of 4 vertical frames needed hammering. And the best part? One of the vertical frame had part of the black coating scraped off on the outside. It wasn't due to my hammering because it arrived like that. So I managed to assemble the entire piece. And faced the damaged vertical piece towards the kitchen wall so that visitors (and myself) cannot see the silver steel frame (instead of black). No. I will not recommend anyone to buy this. You can get either a cheaper one for similar or even better quality.. or pay for a more expensive one with better quality. This one - just no. I gave 3 stars because it is usable after I managed to fix it after more than 1 hour and because 1 person can do it. No need 2 person to fix this. But you do need strength to hammer!

Easy to assemble and very sturdy. I would recommend anyone looking for a narrow cart for their cricut or printer