Biostrip 20 from FUZE Products is easy to use and safe. With high quality and proven performance it can be used in most situations to remove paint, some varnishes, primer etc from a wide range of surfaces. Water based solution providing a more ecological approach to paint and varnish stripping.
Biostrip 20 can remove most :
Water Based Paints (emulsion, acrylic etc).
Oil Based Paints (gloss, radiator etc).
Primers (standard, chrome, aerospace etc).
Varnish.
Suitable for use on the following surfaces :
Soft and Hard Wood, Stone, Brick, Concrete, Masonry
uPVC, Metals, Glass.
Directions for Usage:
Step 1: Brush evenly onto paint that you intend to remove.
Step 2: Leave in place until the paint blisters or softens
Step 3: Once it has completely softened it can be removed using a scraper, cloth or power washer
Step 4: Wash area down with fresh soapy water Repeat as required. 500ml should cover a surface of approximately 2-3 square metres. Depending upon the paint type and number of layers of paint present you may need to repeat the application in some areas
Top Tip: Let Biostrip do the hard work, as long as it's not allowed to dry out it will continue to work. Cover the applied area with polythene or plastic film. Leave 24 hours before removing.

Biostrip can be used on most general plastics. We would however always recommend that you test on a small area first.

Note: Biostrip 20 is not suitable for removing bicyle/automotive paint. Please contact us for advice on treating these surfaces. NOTE: Biostrip 20 works on a huge range of paints and most varnishes, but we always recommend testing a small area first

Package Dimensions	18.4 x 16.2 x 10.1 cm; 930 g
Specific uses	Metal
Item volume	1 Liters
Is mould resistant	toxins free
Scent	Fresh
Batteries required	No

20 Paint Stripper 1 Litre from FUZE Products. Water Based Paint Remover. Effortlessly removes Paint from Wood, Brick, Concrete, Metal, uPVC, Glass and More

Detalles

Descripción

Presupuesto

Preguntas comunes