Tksrn Pull Out Cabinet Organizer, Heavy Duty Slide Out Pantry Shelves With Frosted Non-slip Cleaning Pad, Sliding Drawer Storage For Kitchen, Bathroom, Home, 12.4" W x 16.5" D, Chrome Finish

Perfect exactly as described

Rack is good quality. nice and sturdy. Working inside the cabinet and installing around the wire rack is difficult. I marked the screw holes with the rack in place, then took the rack off and installed the tracks without having to work around the rack. I drilled pilot holes which made the whole installation a lot easier. You want to mark the holes with the rack in place for accuracy and ease of sliding the rack. Very pleased with the product.

Easy to install and great results! Now I can find what I need in a second! They are sturdy enough for full bottles. I was so relieved when they both worked under my kitchen sink with a large disposal! Great design.

Takes a bit to install since in cabinet but we'll worth the wait. Getting older and can't get down in bottom cabinets. All I need to do now is pull out the rack. Easy peasy.

The basket is sturdy and has 3/4 extension slides. Overall depth is 16.5" and worked fine for my application on a 16" open closet shelf. The slides snap onto the basket for petty easy marking for installation, but the provided screws are too small. They are #6 oval head sheet metal screws a half inch long. This is too small and too short for installing a pull out shelf on a cabinet bottom or typical closet shelf. They would just pull out of particle board or pine- they would only work in oak or some other hardwood. Better to use #8 or #10 pan or round head sheet metal screws long enough to fully engage the mounting surface- 3/4" for most cabinets or shelves. If you have access to the bottom of the surface, as I did on a shelf, you can also use a machine screw with a Tee-nut on the bottom of the shelf. I used 3/4" long #8-32 pan head machine screws with Tee-nuts on my Formica-covered 3/4" closet shelves.