– 6 In-line Guitar Locking Tuners – 1:18 Locking Tuning Key Pegs Tuners – Chrome

Would give 10 stars if I could. Fitted them to my Squire affinity. Had to drill two small holes to the back of the headstock for the locating pins for every tuner. But worth it for the money .these are Super quality and now my guitar turning and ease of changing strings has transformed my old squire Why did you choose this product over others?: Value for money

Love the look of these on my strat. I needed to drill extra holes, which was a bit of a faff, but expected. They seem to work well, and keep the tuning stable (although they were put on a hard tail guitar which didn't really have any tuning issues before). Mostly installed for aesthetics and to make restringing easier.

Bought as a drop in replacement for a MIM 2008 Fender Telecaster. Really cheap for locking tuners, and while they don't feel as solid as the original Fender items, the work fine and fit into the guide holes on the neck perfectly. Turning the locking wheel and tuning button is smooth and they work well. No change to the look of the guitar from the front.

I was concerned on the low price on the quality of these tuners. However they are excellent quality and feel much more expensive than they are. They have replaced my squire standard tuners and have made changing strings so much better. Would definitely recommend these to friends. Look great, easy to fit, just needed new holes for them on my squire strat.

My Harley Benton TE52NA had somehow lost part of one of the tuners. I thought it was time to try an upgrade and bought these. When I got them and tried to put them in I discovered that the TE52 has vintage style holes that are smaller than the 10mm needed for these tuners. Rather than return them I decided to be brave and to widen the holes myself - I've done a bit of DIY but am far from an experienced woodworker. I bought a step drill bit: https://www.amazon.co.uk/dp/B077JKSFRJ and used my electric drill to widen those holes. I did some practice on some other wood, but it was very easy to be honest. Clamped the guitar to a table and carefully widened the hole from the front, then the back to 10mm diameter. I was careful but honestly, I was shocked how easy and neat it was. The tuners then went through with no trouble. But I had to drill small different holes for the tuners. I got the tuners in place and pressed them firmly so that I got marks for where the new holes were needed. I bought this small hand drill/bits and did very small pilot holes to check everything was in the right place. https://www.amazon.co.uk/dp/B07PJ71YF2 They were, so then I used a larger drill (still very small) that I eyeballed to be the same as what was needed. I should have put masking tape on to get the right depth but couldn't find any so used trial and error for the depth. This time I used the electric drill and it was also fine/tidy - except one where I apparently just got too excited and went all the way through. Then the tuners themselves were a breeze - no instructions in the packet but it was obvious what to do. Tightened them up, then used them with strings and it was an absolute breeze. So - I had to do more than I really wanted to do because I was scared to damage the instrument. I guess I did with my careless drilling, but honestly it was much easier than I would have thought and I'm very pleased with the result.

Brilliant tuners, never had a problem with this brand, always great quality.

Very nice smooth locking tuners, bought to replace standard non-locking on my telecaster. Function well, hold tuning very well, good feel and weight.

I haven't actually fitted these yet, I wanted to check the tuners first as so many say they get broken strings. Not sure how well the photo shows it but there are burrs around the string holes, they're jagged and can be felt by running your finger across them, I guess at this price point that's something that gets 'overlooked'. I'll update once they're fitted but firstly I'd recommend filing the string hole edges before using (somehow!). Update: After filing all the holes, with the pointy bit in my rotary tool, and fitting them the tuners seem very good, the mechanisms are all smooth and they lock the strings so I'll be buying more for other guitars.

I did a lot of research on tuners, and I think I made the right choice! I was pleasantly surprised when I opened the box for the Gyuker tuners. The finish is really nice, has a premium feel and you can't beat that price point! Overall excellent tuners. I will be buying more for my other guitars.

Firmeza e precisão no ajuste.

These use the Fender 2 pin style, so that gives you a super clean "no-screw" look to the back of your headstock. Make sure you have the 2 pin holes, if not you can get a jig from "elmer guitar" that makes the process super easy. The pearloid buttons on these tuners match my block inlays PERFECTLY and really make this neck look nice.

Sehen top aus und funktionieren prima.. gerde die Perloidköpfe sind optisch super.. Die Schaller Mechniken sind bestimmt besser kosten aber vermutlich mehr als das Doppelte.. Kann ich nur empfehlen..

Very Good quality for the money value. A little gear slop but not enough to affect stability, if the slop was fixed with better precision they would be perfect!